• Sailing Boats
  • Motor Boats
  • Small Boats
  • Boat Engines
  • Commercial Boats
  • RIBs and Inflatable Boats
  • Boat Trailers
  • Boat Moorings
  • Other
    All categories
    • All categories
    • Sailing Boats
    • Motor Boats
    • Small Boats
    • Boat Engines
    • Commercial Boats
    • RIBs and Inflatable Boats
    • Boat Trailers
    • Boat Moorings
    • Other
    £ 45,850
    POAVat Included / Paid

    Maxus - Maxus 28 for sale in

    Favourite
    This feature requires you to be logged on boatsandoutboards

    You can login to your account or create a new account.
    Send this classified to a friend!
    Fill in the form below

    "Your name" must be filled.
    Please fill in your email.
    "friend name" must be filled.
    "friend email" must be filled.
    Please select the I'm not a robot box.
    your name:
    your email:
    friend name:
    friend email:
    comment:
    captcha
     

    The Maxus 28 is a versatile pocket cruiser with different keel configurations to suit your sailing requirements.


    Like her sisters the 24, and 26, she has a large double bed aft as well as a separate heads compartment, galley, saloon, and forward heads. She can be built open plan or with cabin doors.

    This is a small yacht not a large dinghy!

    UK base specs

    Jib roller with stiff stay
    Mastervolt 15A two-section battery charger - 230V installation required
    230V installation - 2 sockets + 20-meter marine cable
    Stiff stay Furlex 104 S (Jib halyard with adjustment from cockpit - may require additional stopper) - required if keel/twin keel version - extra charged to standard stiff stay
    Fittings for possible gennaker, spinnaker or drifter sails – price includes: spinnaker halyard, mast fitting for spinnaker boom, stainless steel eyelets on stern pushpits, eyelet for gennaker tack
    Riggings made of A4 or 316L stainless steel
    Fridge in galley table-top
    Navigation lights (anchor top light, motor light, stern light, bi-color bow light)
    Manual toilet without tank (requires to choose the waste tank)
    50l. waste tank + mecerator pump + triple valve
    "Anchor + electroplated chain fi 6 (10m) with 30m line"
    Compass in cockpit

    Standard Specification

    Hull:
    - handmade polyester-glass laminate
    - izoftal gel-coat (REINHOLD) with the accelerated resistance to osmosis
    - reinforced bottom, stem and shroud fitting zone
    - white hull
    Deck:
    - polyester-glass laminate, made in "sandwich" technology (AIREX) with integral antislip area
    - white deck
    - spray made gel-coat (REINHOLD)
    - extra fitting reinforcement
    - rubbing strip
    - forepeak - anchor locker
    - PMMA windows
    - PMMA washboard, laminate sliding hatch
    - 2 cockpit lockers
    - central locker with space for gas bottle
    - bow pulpit and pushpits
    - double lifeline
    - fitting made of polished A2/304 L stainless steel
    - 2 ANDERSEN 10 halyard winches
    - 2 ANDERSEN ST12 sheet winches
    - 2 triple clutches (SPINLOCK)
    - 2 jib travellers (RONSTAN)
    - 2 triple shoe block (SPINLOCK)
    - mainsail halyards tackle
    - rudder with tiller
    - line hangers in cockpit
    Mast, rigging and sails:
    - anodised mast with fittings
    - anodised boom with fittings
    - joined shroud fittings, topmast shrouds, lower shrouds and stabilizing shrouds
    - turnbuckle M10
    - permanent riggings (stay, shrouds, backstay), stainless steel rope
    - running rigging (mainsail halyard, jib halyard, topping lift, jib sheets, mainsail sheets, halyard and downhaul of rudder)
    - full-battened mainsail on sliders
    - jib
    - lazy jack
    - stern ladder
    - outboard mounting plate
    Ballast:
    - inside 800 kg
    - steel centreboard (on A4 stainless steel hanger on disassembled bearing rolls (RONSTAN)
    Yacht interior:
    - inside built on the basis of laminate modules
    - HPL plywood
    - open bow cabin, shelves
    - mess - upholstered backrest, shelves
    - centreboard cased with bent plywood
    - folding mess table with self-blocking mechanism
    - portside - galley with a table-top and sink, dual burner gas cooker, lockers, shelves
    - starboard - toilet cabin with locker and sink
    - open stern cabin with double berth
    - upholstery, Victoria mattresses set
    - lockers under all berths
    - mess floor made of "teak" board
    - ports made of laminate foam upholstery
    Installation:
    - 12V electric and CD radio installation
    - space for batery
    - 8 inside LED points
    - LED switchboard with 12V socket
    - gas installation supplying cooker in fuel
    "- standard water installation - 20l. tank - draft pump
    - bilge pump"

    Touring package
    Jib UV cover
    Jib roller with stiff stay
    Boom vang with cam cleat
    Backstay tackle
    Halyard triple pockets in cockpit - 2 pcs
    Cockpit benches on stern pushpits
    Cockpit table
    2 additional portholes
    Mastervolt 15A two-section battery charger - 230V installation required
    230V installation - 2 sockets + 20-meter marine cable
    87l. fresh water tank without indicator (pressure system)

    Sport package
    Dagger board made of A4/316 L stainless steel
    Dagger board lifting mechanism - electric (space for the battery supplying a windlass - on a bow)
    Hull and deck made of multiaxial fiberglass
    Heightened mast
    Outside mounted shrouds
    Running rigging – non stretchable polyester, jib and mainsail halyards - Dyneema, additional rigs for racing trim
    Tiller extension - HARKEN
    Additional charge for individual sails (Regatta Dacron. Mainsail: deep profile, leech, cunningham, trimming straps, tall tales. Jib: tall tales, trimming straps, deep profile).
    Boom cover

    Additional equipment
    Ballast & steering system
    Additional part for dagger board (in the shape of board) - stainless steel A4/316L (draft + 0,30m / weight + 130 kg)
    Additional part for dagger board - iron BULB (draft + 0,25m / weight + 140 kg)
    Cast iron ballast (keel), draft 1,70m (deep-sea rudder, sea rigging, enlarged sails)
    Engine & heating
    2KW heating with outlets
    Outboard motor Mercury 5 HP sailmate engine with charging
    Outboard motor Mercury 8 HP
    Outboard motor Mercury 9,9 HP
    Outboard motor Mercury 9,9 EL (Big Foot, alternator)
    Inboard Yanmar 2YM15 (14HP), normal shaft
    Inboard Yanmar 2YM15 (14HP), S-drive
    Inboard Yanmar 3YM20 (20HP), normal shaft
    Inboard Yanmar 3YM20 (20HP), S-drive
    Stationary motor chamber with three revisions and wooden gangway - required with the inboard motor
    Folding propeller
    Outboard motor mounting with electric start, lever, steering gear, fuel line; start and charging connection, safety devices ( with the motor purchased in the shipyard, price with material)
    New outboard motor mounting and start with manual start (with charging connection)
    Motor well, yoke, motor mounting, lever, fuel line, ventilator,
    Motor well, yoke, motor mounting, lever, fuel line, ventilator, disposal of exhaust fumes
    Fuel tank 54l.
    Rigg and sail
    Stiff stay Furlex 104 S (Jib halyard with adjustment from cockpit - required if keel/twin keel version
    Self tackling jib (HARKEN set, straight rail, price includes additional sail )
    Spinnaker (with equipment: spinnaker guys, blocks, fittings and spinnaker pole)
    Gennaker (with equipment: guys, blocks, fittings and roller)
    Gennaker Ronstan roller, series 80 with an antitorsion line
    Drifter (with equipment: guys, blocks, fittings and roller)
    Drifter Ronstan roller, series 80
    Jib halyard with adjustment from cockpit
    Boom vang adjusted from cockpit (extra charged) -
    Jib persening (pulled on the spinnaker halyard)
    Fittings for possible gennaker, spinnaker or drifter sails – price includes: spinnaker halyard, mast fitting for spinnaker boom, stainless steel eyelets on stern pushpits, eyelet for gennaker tack
    Hull and deck
    Dark blue hull RAL 5003
    Grey hull RAL 7036
    Light blue hull RAL 7015
    Hull in any RAL color
    Flexi teak on the whole deck and in cockpit
    Flexi teak only in cockpit (floor and seats)
    Flexi teak on cockpit floor
    Mast stepping system
    Mast support
    Removable mast support
    Bathing bow ladder
    Additional cleats amidships
    Big pantograph (4 gas springs) required if a motor is above 5HP
    Sliding pantograph - for motors over 8HP with throttle
    Riggings made of A4 or 316L stainless steel
    HARKEN deck equipment + blocks (turistic package): mainsheet 1:5 with clam cleat, boom vang 1:6 with clam cleat, backstay tackle 1:2/1:4 with clam cleat, jib travellers and tracks, non baring blocks.
    HARKEN deck equipment + blocks (sport package): mainsheet 1:5 with swivel table and clam cleat, boom vang 1:7 led to cockpit, backstay tackle 1:2/1:6, jib travellers and tracks adjusted from cockpit, non baring blocks.
    Flag-staff with socket
    Additional cam cleats
    laminated navpod
    Halyard winches - Andersen 12ST
    Replacement of stoppers and switches for quadruple Spinlock
    Bowfitting with profiled stainless steel
    Cockpit & interior
    Sprayhood
    Tent in the cocpit
    Additional window in cockpit
    Stern beam
    Interior in natural plywood in HPL PIEMONTE or VENEITO
    Interior in natural plywood in HPL Ferrara Oak and Lombardia
    Interior in SAPELLI
    Closed bow cabin
    Closed bow cabin with sliding door
    Closed stern cabin
    Fridge in galley table-top
    Drawer fridge WAECO 36l.
    Additional bed in mess on both sides
    Mattress fabric VICTORIA 31 (beige), 50 (red), 88 (dark blue), 96 (graphit)
    Mattress fabric VICTORIA other choice
    Additional pillows (6 pcs)
    Electronics and installations
    Raymarine i40 bidata
    Raymarine i40 Wind
    Raymarine i50 Tri-data
    Raymarine i60 WIND
    Raymarine i70 - system pack (log/speed/depth/wind)
    RAYMARINE a67 - Chartplotter with a transducer
    Electronic map for Chartplotter - GOLD EUROPE
    DCSM BEP MARINE - multifunctional display for indicators (max 5: water, fuel, waste, 3 batteries (ammeter, volt-meter)
    Laminated Navpod for electronic instruments mounted over the sliding hatch
    Laminated Navpod for electronic instruments mounted over the sliding hatch with the space for solar
    Mastervolt 25A two-section battery charger
    Mastervolt 35A two-section battery charger
    Additional 230V socket (required 230V installation)
    Additional 12V socket
    Additional charging panel with sockets 12V; 230V; USB in stern cabin or bow cabin
    AGM 75Ah battery
    AGM 100Ah battery
    AGM 140Ah battery
    GEL 85Ah battery
    GEL 110Ah battery
    Navigation lights (anchor top light, motor light, stern light, bi-colour bow light)
    Navigation LED lights - additional charge for replacement
    Spreader LED light
    VHF Radio Raymarine RAY 52 VHF with GPS + Antenna
    CD / MP3 Radio
    Autopilot ST2000
    Sensor and water tank indicator (required if chosen DCSM)
    Outboard water system working on pressure system
    Hot water system
    Hot water installation with inboard diesel engine
    Shower in cockpit, cold water (requires pressure water system installation)
    Shower in cockpit, cold + hot water (requires pressure water system installation and hot water installation)
    Cleaning set without outboard water system (working on pressure system) + 10m hose
    Cleaning kit with outboard water system (working on pressure system) + 10m hose.
    Manual toilet without tank (requires choosing the waste tank)
    Electric toilet without tank (requires choosing the waste tank)
    50l. waste tank + macerator pump + triple valve
    Sensor and waste tank indicator - GIOBUS (indicates 3/4 of level)
    Windlass + anchor rolls
    Anchor + electroplated chain fi 6 (10m) with 30m line
    Solar vent
    Compass in cockpit
    2 additional speakers in cockpit
    Mooring set (2 pcs of 15m mooring ropes, 2 anchors - 1 pc. of RL type, 1 pc. of Danforth type 30m ropes, 4 fenders)
    Antiosmosis and antifouling
    Mark of the waterline for future antifouling
    Laminated supports (2pcs)
    Boat wrapping for transport
    Professional winter material cover for whole boat
    £ 45,850
    Category:Sailing Boats
    Subcategory:Daysailer
    Manufacturer:Maxus
    Model:Maxus 28
    Mooring Country:United Kingdom
    Currency:GBP
    Condition:new
    Sale Type:New
    Sale:Dealer
    Length:9.44 m/31 ft
    Width:2.92 m/10 ft
    Draft:1.7 m/6 ft
    Sail area :40 sqm
    Propulsion:Outboard
    Material deck:GRP
    Fresh water capacity:20
    No. of cabins:1
    No. of berths:2
    Headroom:1.85 m
    WC & bathrooms:1
    Specifications
    ModelMaxus 28Material deckGRP
    Features
    • General Equipment
    • Cockpit Table
    • Electronic Equipment
    • Bilge Pump
    • Galley Equipment
    • Gas Cooker
    • Wc Bathroom
    • Toilet
    other adverts from this member: Boat Exchange
    LM - 30
    SubcategoryMotor SailersMooring CountryUnited Kingdom
    Year built1987Length9.2 m/30 ft
    Weight dry - Sail area -
    LM30 - a motorsailer that sails! ! This is a nice example of the solid Danish motorsailer, well looked after ...
    £ 36,500
    Vat Included / Paid
    Hunter - 20
    SubcategoryYachtsMooring CountryUnited Kingdom
    Year built2007Length6.1 m/20 ft
    Weight dry - Sail area -
    Hunter 20 twin Keel Sports 2007 "Original Bear" was commssioned 2008. Draft: 80cm. Cabin forward with heads and ...
    £ 10,995
    Boston Whaler - Montauk 170
    SubcategoryRunaboutMooring CountryUnited Kingdom
    City/areaPlymouthYear built2012
    Length5.18 m/17 ftNo. of engines1
    HP100
    Sold and looking for more similar Bostons for clients that we have waiting. Boston Whaler Montauk 170 (2012) ...
    £ 22,995
    Vat Included / Paid
    Beneteau - Antares 880
    SubcategorySports CruiserMooring CountryUnited Kingdom
    City/areaPlymouthYear built2017
    Length8.91 m/29 ftNo. of engines1
    HP300
    Antares 880 new. Only £90, 000 inc vat turn key price delivered to Plymouth with twin Suzuki 150 hp outboard. ...
    £ 85,000
    Vat Included / Paid
    Boat Exchange
    Boat Exchange
    40 ads



    //