Drascombe Coaster, This is a small cruising yacht based upon the Drascombe Longboat hull. With a slightly reduced rig of 164 Sq Ft and the addition of a 2 berth cabin this is a splendid boat for the keen voyager and is favoured by many of the Drascombe Association Rally & Cruise participants. The cabin provides 2 full length upholstered berths (aditional cushions can be purchased as infills, and a porta-potti. The design incorporates a most effective sprayhood which can be further extended with a camping tent. The centreplate is set in a sealed trunk, keeping the cabin dry & the outboard (6-8hp) sits in it’s own well. Draft of 1’ 0"/3’ 10" retains the free spirit of the whole Drascombe range. Still perfectly capable of easy trailer-sailing, this can be made even easier with the new breed of swinging cradle trailer. Drascombe Coaster, Price: £21,625 inc VAT, Date: 10.06.2015, Enquire, Features, Specifications, Downloads, Length Overall 21ft 9in (6.63m), Length on waterline 18ft 0in (5.50m), Beam 6ft 7in (2.00m), Draught with C/plate up 1ft 0in (.30m), Draught With C/plate down 3ft 10in (1.17m), Weight with sailing gear 1060lbs (480kg), GRP hull & decks. Laid up in polyester resin with gelcoat finishes, reinforced at strategic points with either additional lay-up or core-mat. Hull in white. Decks, cabin, cabin hatch cover & aft locker hatch covers in light grey. Built in buoyancy of pre-formed two pack polyurethane foam in closed compartments. All the fitted hull joinery in Iroko, finished with Burgess woodsealer. The hull has an Iroko keel plank & protective stemband. Full suit of terylene sails & set of varnished spruce spars. Jib is hanked on. Mainsail has one set of reefing points. All required standing & running rigging, mainsheet track & traveller. Mastband is stainless steel. Standing rigging is 1 x 19 SS wire, talurit eye spliced. Galvanised steel centreplate & kick up rudder. Centreplate controlled by stainless steel drum winch with rope lead aft into cockpit. Stemhead, tiller head, three mooring cleats, one pair rowlock sockets & pair of aft mooring fairleads in bronze (or stainless steel as an extra cost option). Stainless steel tabernacle for mast. The transom is fitted with a sculling socket. The mainsheet traveller track is in anodised aluminium. Jibsheet winch fitted. Tracks & blocks are by Barton. Other deck fittings are a combination of black nylon or stainless steel. One pair teak grab handles fitted to cabin roof, Two bilge pumps, one to serve cockpit, the other to serve cabin/aft lockers. Cabin inner moulding in GRP, same colour as deck. Inside face of cabin top has fleck paint finish. Bronze cabin windows fitted, one per side. Varnished ply washboards in brass slides. Cabin hatch lid fitted with brass hasp & staple. Cabin sole boards in painted marine plywood. Under bunk locker lids in marine plywood. Conduit from aft locker, through side bench, into cabin as route for electric cabling. She meets RCD regulations for Category C (coastal) for 5 adults. There is a list of options on the price list but other items of equipment or special fit out can be introduced by discussion. CBL reserve the right to modify this specification when required, up until the point that an order is placed.