Found 221 Lancing Marine

New turbicharger in box ready for despatch Our Price £895 List Price £1452 Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Set of 6 new injectors to fit Ford Dover series 2726T engine part numbers LRB6700805 K.T/826F9K546GAA As used on Sabre, Mermaid, Lehman and other Ford based marine diesel engines. New and ready for immediate world wide despatch. Please phone for details We also stock replacment parts for other makes including...

New Vetus 2cyl engine 12hp at 3600rpm. Engine bob tail ready for Marine gearbox, to full Vetus build, standard panel and loom, electric stop, sump pump, mounts and flex mounts. We can also adapt most common transmissions to this engine. Please ask for more information and technical advice from our...

New Vetus 2 cyl engine 16hp at 3600rpm. Engine bob tail ready for Marine gearbox, to full Vetus build, standard panel and loom, electric stop, sump pump, mounts and flex mounts. We can also adapt most common transmissions to this engine. Please ask for more information and technical advice from...

New Vetus 3 cyl engine 27hp at 3600rpm. Engine bob tail ready for Marine gearbox, to full Vetus build, standard panel and loom, electric stop, sump pump, mounts and flex mounts. We can also adapt most common transmissions to this engine. Please ask for more information and technical advice from...

New Vetus 4cyl engine 33hp at 3000rpm. Engine bob tail ready for Marine gearbox, to full Vetus build, standard panel and loom, electric stop, sump pump, mounts and flex mounts. We can also adapt most common transmissions to this engine. Please ask for more information and technical advice from our...

New Vetus 4cyl turbo engine 52hp at 3000rpm. Engine bob tail ready for Marine gearbox, to full Vetus build, standard panel and loom, electric stop, sump pump, mounts and flex mounts. We can also adapt most common transmissions to this engine. Please ask for more information and technical advice from...

New Vetus 4 cyl engine 65hp at 3000rpm. Engine bob tail ready for Marine gearbox, to full Vetus build, standard panel and loom, electric stop, sump pump, mounts and flex mounts. We can also adapt most common transmissions to this engine. Please ask for more information and technical advice from...

Bowman DC60 oil cooler XBB, YBB and XAA marine oil coolers suitable for cooling marine gearbox oil and marine engine oil. We have many different models in stock please phone for details. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T....

Bowman DC90 Marine oil cooler, suitable for cooling marine gearbox oil and marine engine oil up 80 HP. Available 3/8"BSP and 1/2"BSP oil ports, and 22, 28, 32mm (I.D) end covers straight or angled. We have many different types and sizes of coolers in stock please phone for details. Please...

Bowman DC120 Marine oil cooler suitable for cooling marine gearbox oil and marine diesel engine oil up to 110HP. Available with 3/8" and 1/2" oil ports. End covers measure 22, 28 and 32mm(ID) straight or angled. We many types and sizes of marine coolers please call now for details. Please...

Bowman EC80 Marine oil coolers, cast aluminium body with Nickel Bronze end covers. Suitable for cooling marine gearbox oil or marine deisel engine oil. Available with straight or angled end covers 1/2" BSP oil ports. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing,...

Bowman EC100 marine oil cooler, cast aluminium body, Nickel Bronze end caps. Suitable for cooling marine gearbox oil and marine diesel engine oil. Available with straight or angled end covers. We stock a large selection of marine coolers, please phone for details. Please ask for more information and technical advice...

We have a range of Bowman EC FC & FG marine oil coolers in stock. These can also replace Serck, Polar and Sendure oil coolers, please give diameter and length of tubestack, thread sizes on water and oil connections. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales....

Bowman marine oil cooler, cast aluminium body, nickel bronze end caps. Suitable for cooling marine gearbox oil or marine engine oil. Available with straight or angled end covers. 1/2" BSP oil ports. We stock a large range of marine oil coolers please phone for details. Please ask for more information...

We have a selection of Bowman DH EH FH AND GH Heat Exchanger Headertanks in stock for all models of engine. These can also replace Lister, Kelvin, Polar and Volvo units. Please phone for compatible replacment units. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine...

Bowman Marine Oil Cooler, Suitable for cooling marine gearbox oil/marine engine oil up to 180HP cast aluminium body, nickel bronze end covers. We stock a large selection of marine coolers, please phone for details. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight...

Bowman Marine Oil cooler FC120, Suitable for cooling marine gearbox oil/marine engine oil, cast aluminium body, nickel bronze end covers. We have a large selection of marine coolers in stock please phone for details. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight...

Bowman marine water cooled exhaust manifold, diesel engine. Model number MB480. Fits Mercedes V6. New, available now at discounted price. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road...

Bowman Heat Exchanger FM160, New unused to fit Ford crossflow 1.1L, 1.3L and 1.6L petrol Ford engines. Limited stock left at reduced price. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine...

We have a full range of marine water cooled exhaust manifolds in stock for Ford 1.8 and 1.6 litre XLD diesel FM180, 2.5 litre Transit FSD DI FM240, Cummins & Perkins model. Also available Keel cooled. See our website. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales....

Bowman Marine Heat Exchanger model number FM180 fits Ford XLD engines (escort diesel etc)1.6L and 1.8L non turbo models. This is a combined Manifold/Headertank/Heatexchanger. New and available now, complete with Tubestack and end caps, many more models in stock, call for details. Please ask for more information and technical advice...

Cummins engines are very popular to Marinise. In the B series range the 4cyl 4B, and 4BT, 6B, 6BT, 6BTA and 6BTA-A complete kits are available see page 17 of our Price Book. Also listed are base engine parts Gaskets, oil pumps, Cummins Original or aftermarket. Packing, Freight and V.A.T....

Bowman water cooled exhaust manifold FM710 #3953. Marine diesel engine water cooled exhaust manifold. Fits New Holland 666 & 678 engines. New available now at reduced price.Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Bowman FM450 Marine Heat Exchanger, Model FM450 3658. Fits Ford 2701-12E 4 cylinder D series Marine diesel engines. This is a Manifold/Headertank/Heat Exchanger, new and available now, complete with tubestack and end caps. Other models available phone for details. Please ask for more information and technical advice from our resident...

Bowman Heat Exchanger, Model FM452 3884. Fits Ford 2722E Cargo 4 cylinder Marine Diesel Engine. Combined Manifold/Headertank/Heatexchanger. New, available now complete with tubestack and end caps, many other models in stock phone now. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and...

Bowman FH420 Headertank Heat Exchanger. Model FH420 #2938A. Fits Ford 2704ET Old style, Marine diesel engine, New, available now. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade...

Bowman GM370 marine diesel engine heat exchanger, Model number GM370 #3904, Fits Bedford 220 diesel engine. This is a manifold/headertank/heat exchanger for a Bedford 4 cylinder diesel, new unused, available at discounted price while stocks last. Please ask for more information and technical advice from our resident engineers and boatbuilders....

Bowman FM662 Heat Exchanger, Model FM662 3886, fits Ford 2725E 6 cylinder marine diesel engine. This is a Manifold/Headertank/Heat Exchanger. New, available now, complete with tubestack and end caps. Many other models available call for details. P Please ask for more information and technical advice from our resident engineers and...

Bowman, Marine Water Cooled Exhaust Manifold, Diesel engine, Model MB800, #3110. Fits Mercedes V10 diesel engine. New unused, limited stock, reduced price, priced seperately. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing...

Bowman FM660 Marine Heat Exchanger, model number FM660 3360 Fits Ford 2703-15E D series, 6 cylinder diesel engines. This is a Manifold/Headertank/Heat Exchanger, New and available now, complete with tubestack and end caps. Other models available phone for details. Please ask for more information and technical advice from our resident...

Bowman, Marine Diesel engine water cooled exhaust manifold, model MB960 #3160, Fits Mercedes V12 Diesel Engine, New unused, Reduced price, Priced seperately. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51...

Raw Water Pump Mount and Drive For Gardner 6LX/LXB and 8LXB Jabsco Pump number 52080-2001 (can be sold seperately) Pump mounts onto fixing holes originally used for compressor. Kit includes Pulley, belts and fixing studs. We can supply other marinising parts for the Gardner engine please phone for details. We...

Replacement set of forward Steel, Friction plates, seals, gaskets, thrust washers and shims for the HBW100, ZF10M. Also have available separate shim kits, seals kits and thrust washers to repair all the mechanical range of Hurth ZF gearboxes.Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine...

New Marine Gearbox 12 months warranty, ratio 2.05:1, always use a right hand propeller. We can carry out repair work to gearbox that start to give problems by occasionally slipping going into gear, or delayed engagment. Often cheaper to buy new rather than repair the old unit. Also available from...

Fuel gauge and Sender (can be sold seperately) 12 volt standard earth return (24v/12v dropper £6.00) Easy to install and can be retro fitted to most makes, please call for details. Prices do not include freight and VAT....

Lancing Marine have a number mechanical and Hydraulic new ZF gearboxes in stock, all at boatbuilder prices. We are able to offer a full spares and repair service for the ZF range. Some gearoxes are on special offer in our Bargians List, www.lancingmarine.com We have available FREE operating manuals for...

ZF45A marine gearbox 2.03:1 ratio, these are new gearboxes ready for imediate dispatch. Part number 3311001016. We stock a large range of marine gearboxes please call for details. Prices do not include freight and VAT....

We have a vast spares stock for the New and Old range of PRM Newage gearboxes. More than 50 New gearboxes in stock. Workshop manuals for the following Old Range 100 101 175 250 265 310 301 302 401 402 601 New Range 80 120 150 260 500 750 1000...

Input Oil Seal for Borg Warner Velvet drive marine gearbox will fit types 70, 71 and 72C. Saves the expense of buying a complete seal kit if only the input seal requires replacing. Part number 10-00-044-014. Prices do not include VAT and Freight. We stock most spares for Borg Warner...

Hose for wet exhaust systems, wire reinforced 2" diameter (Other sizes available please phone for details) as used on Ford, Perkins, Thornycroft, Mermaid and Sabre Marine diesel engines, available from stock for immediate despatch Price is per 30cm and does not include freight and VAT....

Output seal for Borg Warner Velvet drive marine gearbox. This is the later type seal part number 10-00-044-017 for 71 and 72C units without the 6 bolt bearing retainer. Available seperately to save the cost of full seal kit when only the output seal requires replacing. Prices do not include...

Output Seal for Borg Warner Velvet. This is the old type seal part number 71C-110 and fits 70, 71 and 72C Gearboxes with the 6 bolt Bearing retainer on the back of the gearbox. Sold seperately to save the cost of a complete seal kit when only the output seal...

Rubber Exhaust Outlet Flap 2-3" fits on plain end exhaust outlets easy to fit can be cut to correct size, widely used for both pleasure and comercial craft other sizes available please phone for details, prices do not include freight and VAT....

Stainless Steel, Extra Heavy Duty Exhaust Clamps. Suitable for use on wet exhaust systems where flexible exhaust hose is used. Suitable for 2" hose (other sizes available please phone for details) Prices are per Pair and do not include freight and VAT....

Stern Powr 100 marine drive system spare parts, Part Number 830136, Cavitation plate anode Prices do not include VAT, we stock a wide range of stern powr spares from nuts and bolts to complete new units please phone for details....

Stainless Steel Pipe Bend 2" 90 degree made from 316 grade stainless steel (other sizes are available Please phone for details) Suitable for use on wet exhaust systems can be joined with rubber hose and clamps to make a neat 90 degree bend, a perfect solution when exhaust intallation becomes...

Jabsco marine Engine cooling water pump Impeller.Part number 4528-0001 Neoprene impeller. Applications include Perkins M20 pump number29350-1001 Ruggerini RD/RM and MM/RDM series pump numbers11260-2101 and 29300-2201C Volvo MD11/11C pump number22230-200 Volvo Penta MB10A pump number 11260-2101 and 29300-2201C Volvo Penta MD 1/ 1A/ 1B pump number 11260-2101 and 29300-2201C Volvo...

Jabsco Marine Pump Impeller 6303-0003-P Diameter 2"(51mm), width 7/82(22mm), shaft diameter 5/16"(8mm), drive type single flat, Material Nitrile. Oil/water transfer Used in Jabsco water puppy,bilge. 37010-series electric toilets, and macerators. Can be used on most competitor masceratos, Johnson PN#09824P Please ask for more information and technical advice from our resident...

Seal kits available for PRM 150 Gearbox, Part number MT0433 We stock spares for most PRM models, also a large range of new gearboxes please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Jabsco Marine Engine Cooling Pump Impeller. Part number 653-0001-P. Neoprene Impeller. Pin drive, shaft diameter 12mm. Width 7/8"(22mm) diameter 2"(51mm) Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road...

Jabsco Marine Engine Cooling Pump Impeller part number 673-0001K Neoprene Impeller. Many Aplications including, Ford XLD 416 Escort, Pump number 22770-1101 and 29440-1101. Lancing Marine BMC 5.7 + 6/98 pump number 22770 and 29440-1001 Lancing Marine Perkins 4.248 pump number 22770 and 29440-1001 Perkins M25 /30 /3HD 20 /M35 /40...

Plastic raw water strainer, small with 19, 26 & 31mm hose connections, suitable for most smaller pleasure boat applications, small light and simple to install. Strainer can be removed cleaned and re installed very quickly. We have a wide range of products available from stock to suit a wide range...

Borg Warner Marine Transmission shift lever part number 71-79B fits 70-71 and 72C transmissions. We stock a wide range of Borg Warner spare parts and also complete new units. Prices do not include Freight and VAT. We can ship to almost anywhere in the world please call for details....

Stern Powr 100 marine drive system spare parts, Part Number 830407 Rubber Boot Clips, set of 3, Prices do not include VAT, we stock a wide range of stern powr spares from nuts and bolts to complete new units please phone for details....

Genuine Jabsco Marine engine cooling Water Pump Impeller number 1210-0001-P Neoprene material, Spline drive shaft size 5/8"(16mm) Width 1-1/4"(31.5mm), overall diameter 2-1/4"(57mm) Used by most engine builders including Onan PN#132-0162, Perkins PN#0460038, Volvo PN#860203, PN#3856039-7, PN#875811-2, Yanmar PN#129470-42530, Johnson crank drive, Volvo I/O Engines. Also used in: Ford FSD 425...

PRM 260 Newage seal kit part number MT0382. Also fits PRM Newage 100, 101 140, 160. We stock spares for most models of PRM gearbox, we also have a large range of new gearboxes, please phone for details. Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing...

Jabsco Pump Impellers, part # 17937-0001-P. Used in MAN, Ford Lehman, Yanmar PN#127610-42200 Perkins PN#0460024, PN#24880031. Volvo PN#801277, PN#877061-2, PN#825941. CAT PN#7C-3286. Johnson PN# 09-1028B. Sherwood PN#18200. Oberdorfer PN#7441. Genuine Jabsco marine impellor, Neoprene material, spline drive shaft diameter 5/8"(16mm) Width 2"(51mm) Overall diameter 2 9/16"(65mm) Fits Ford 2700 turbo...

GRP sterntubing 0.6m 24" long Available up to 1.2m length, Glass in or cement. To suit shaft size 0.75" Inside diameter 1.25" outside diameter 1.5" Price is per 30cm. Packing. Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United...

Jabsco Marine Engine cooling pump Impeller part number 4568-0001-P Neoprene impeller. Key drive, 5/8"(15.9mm)shaft, 1-1/4"(31.8mm)Width, 2-1/4"(57.2mm)diameter. Volvo PN#831182, PN#875575-3, YanmarPN#124310-46090, Jabsco plain shaft pumps, Johnson PN#09-801B Fits Volvo MBN 40 pump number 21770 Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and...

GRP sterntubing available 0.6m (24" Long). Upto 1.2m length. Glass in or cement. To suit shaft size 1" inside diameter 1.5" outside diameter 1.75" Packing. Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

PRM Newage750 seal kit part number MT0435. We stock spares for most models of PRM gearbox, we also have a large range of new gearboxes, please phone for details. Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United...

Jabsco engine cooling water pump impeller part #18777-0001 (old part #22120-0001) fits Volvo AQ200D, AQ225D, AQ260A, pump numbers22740-0251 and 22740-0151 Volvo AQ200D, AQ225D, AQ260B AQ290A pump numbers22740-0151 Volvo AQ200 D-280/225, AQ225 B/D-280, AQ250, AQ270 pump numbers 22300-05 or 22740-0151 Memaid merlin turbo pump number 22750-1101 Lancing marine Chevy V8 and...

Full range of flexible mounts available, slotted holes and hieght adjustment to simplify alignment. Variations of bolt centres and studd diameter. These can replace the Silentbloc, Metalastic, Barry Control. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all...

Jabsco Engine Cooling Pump Impeller part number 17935-0001B Fits Cummins NH 250M pump #3570. NT855M pump # 7420-0101. V555M SC 21680-05 VT 55M BC pump # 7420-0004 and 7420-0101. VT555M BC pump #7420-0101. Gardner 4LW pump # 52200-2051 Please ask for more information and technical advice from our resident engineers...

Sealing kit to fit PRM500 gearbox part number MTO434. We supply spare parts to fit most PRM Newage gearboxes, we also have a large selection of new gearboxes in stock please call for details. Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road...

4" R&D Shaft bobbins, for use to connect two flexible couplings together, also can be used as an 88mm shaft extension. Available to fit most standard flange sizes please phone for details. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T....

Reverse Friction Plate for Borg Warner Velvet Drive marine gearbox. Suitable for models 70, 71 and 72C units direct drive and reduction. These plates are sold seperately the quantity required will vary with model of gearbox. Prices do not include freight and VAT. We stock most spares for Borg Warner...

GRP sterntubing 0.6m, up to 1.2m length. Glass in or cement. To suit shaft size 1.25" Inside diameter 1.75" outside diameter 2" Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Marine Cutless Bearing, Brass casing Polyurethane lined, Fits 3/4" shaft, outer casing measures 1-1/4" length 3". We have most sizes in stock please phone now for details. Metric sizes also available. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra...

GRP sterntubing 0.6m, up to 1.2m lengths. Glass in or cement. To suit shaft size 1.5" Inside diameter 2" outside diameter 2.25" Packing. Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Stainless steel exhaust outlet 2", suitable for wet exhaust where 2" Exhaust hose is used (other sizes are available please phone for details) We have a wide range of products available from stock to suit a wide range of projects, from small do it yourself, to large commercial applications. Please...

Engine temperature gauge and sender (can be supplied seperately) 12 volt earth return (add £6.00 for 24 volt dropper and £8.00 surcharge for insulated return) Can be fitted to most makes of Marine Diesel Engine please phone for details. Prices do not include freight and VAT....

Jabsco Marine Engine Water Cooling Pump Impeller. 4598-0001B Fits Leyland and thornycroft RF6-330 pump number JD3/4-201 and JD3/4-200. British polar engines, Barracuda MK1(Ford 590E, T590E) pump number JD3/4-201 and JDfl-200 Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on...

Marine Cutless Bearing, Brass casing Polyurethane lined, Fits 1" shaft, outer casing measures 1.5" length 4". We have most sizes in stock please phone now for details. Metric sizes also available. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra...

Dipstick for current model Velvet Drive 71 and 72C gearboxes Part number 10-17-559-001. Prices do not include freight and VAT. We stock most spares for Borg Warner Velvet Drive gearboxes from oil seals to complete new units. Please phone for details....

Spin On Oil Filter Conversion, fits Ford 4D, 6D 2700 series and 2720 (please state) series marine diesel engines, Easy to install and comes with an oil filter, makes filter changing easier, quicker and cleaner. We stock a wide range of engine spares for Ford and other makes please phone...

New old stock Leyland part number 88G558 K1067 c6 Unipart. These are the combustion inserts that fit into the cylinder head of the BMC 1.5. Thornycroft 90 marine diesel engines. Limited stocks available. We can supply most parts for BMC diesel engines please phone for details. Prices do not include...

Plastic raw water strainer with 1-1/2" BSP connections, suitable for larger pleasure applications, used for straining raw water prior to engine cooling, sturdy construction easy to install and use, Strainer can be removed cleaned and re installed very quickly. We have a wide range of products available from stock to...

Marine Cutless Bearing, Brass casing Polyurethane lined, Fits 1-1/4" shaft, outer casing measures 1-3/4" length 5". We have most sizes in stock please phone now for details. Metric sizes also available. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra...

Ford Marine Engine Parts, fuel lift pump for Dorset and Dover type engines 4 and 6 cylinder. This is the diaphram type as fitted to most Dorset and Dover Engines. Currently in stock and ready for immediate despatch. Prices do not include freight and VAT. We stock a large range...

R&D Flex coupling 4" standard type flex coupling. Reduces engine noise and vibration. Easy to install, available in most common coupling sizes, electrical continuity available. We have most sizes in stock please phone for details. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing,...

Fitted to PRM, TMC, ZF, Hurth, Borg Warner, Yanmar, Twin Disc, Velvet Drive, Gearboxes. Essential on all installations to reduce vibration and strain on engine mounts. These couplings can by used to replace Silentbloc type. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing,...

R&D 4" Clamp coupling, Easy to install and position, Available in most standard shaft sizes imperial and metric. Most common flange sizes are available from stock. Please phone for details. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on...

Complete Gasket and Seal Kits for Borg Warner Velvet Drive Marine Gearbox. Fit 70, 71 and 72C type gearboxes with or without reduction. Part number A4867HA. Prices do not include freight and VAT. We stock most spares for Borg Warner Velvet Drive From oil seals to new gearboxes, please phone...

Oil Pressure gauge and sender suitable for a wide range of Marine engines including Ford, Perkins and Cummins can be supplied as 12 volt earth return, 24 volt (£6.00 extra) and insulated earth return (£8.00 Extra) Prices do not include freight and VAT. We have in stock a wide range...

PRM Newage gearbox spares, seal kit to fit PRM 1000 gearbox, part number MT0443. We stock spares to fit most PRM models, we also have new gearboxes in stock please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade...

GRP sterntubing 0.6m upto 1.2m lengths, Glass in or cement. To suit shaft size 1.75" Inside diameter 2.375" outside diameter 2.75" Packing. Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

GRP sterntubing 0.6m up to 1.2m lengths. Glass in or cement. To suit shaft size 2" Inside diameter 2.625" outside diameter 3" Packing. Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Plastic Anti Syphon Vent,to fit 18, 22, 25 and 32mm hose. A must have on any engine installation where there is a risk of raw water syphoning into the system when the engine is stopped, easy to install and use. Can be fitted to all makes of indirect and direct...

Marine Cutless Bearing, Brass casing Polyurethane lined, Fits 1.5" shaft, outer casing measures 2" length 6". We have most sizes in stock please phone now for details. Metric sizes also available. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra...

Sump Pump kit, can be retro fitted to most makes including Ford, Perkins, Gardner and Cummins. Comes complete with hose, conectors and mounting brackets. Please phone for details, Prices do not include freight and VAT....

To solve the problems with inland waterways compliance regarding the Escort XLD Diesel engines spill pipe returns we can offer this Waterways compliant spill pipe non return valve T piece. Tried, tested and easy to install. Enables the use of the original Ford spill pipes. We stock a large range...

Marine Cutless Bearing, Brass casing Polyurethane lined, Fits 1.75" shaft, outer casing measures 2.375" length 7". We have most sizes in stock please phone now for details. Metric sizes also available.Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY...

Marine Drive Plate Fits Perkins engines 4108 and 4107 with 5 bolt arrangement, splines are to suit Borg Warner 24 Spline gearbox. Prices do not include Freight and VAT, we stock a large range of Marine engine spares please phone for details....

BMC 1.8 Fresh water ciculating pump, 70mm impeller. We stock a wide range of spares for BMC engines please phone for details prices do not include freight and VAT. Please note this is the engine circulating pump....

R&D Clamp Coupling 5" Flange size. Easy to install avilable for most common shaft sizes imperial and metric. Suitable for use with R&D flexible coupling. We have most sizes in stock please phone for details. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing,...

Fresh water circulating pump, 5 O,clock inlet bolt on pulley fits Ford Dorset Diesel Engines, these are new units in stock ready for despatch. We stock a wide range of engine spares for Ford and other makes please phone for details. Prices do not include freight and VAT....

Tachometer 0/4000 RPM alternator sensed 12 volt or 24 volt (add £6.00 surcharge for 24v) In stock and ready for imediate despatch, Suitable for use with most makes of marine diesel engine includind Ford, Perkins, Cummins, Sabre, Mermaid, Watermota and many others. Please call for details. Prices do not include...

We have in stock fresh water pumps for the 2700 series Dorset engine range, 2711E, 2712E 2713E, 2715E. Inlet port at 2 o'clock fits may marine engines Lehman, C Power, Sabre, Mermaid, Watermota. Also Ford trucks, industrial and agricultural diesels. Packing, Freight and V.A.T. Extra on all U.K. & E.C....

Water pump drive gear for Ford Dover 4 cylinder and 6 cylinder diesel engines. Fits most Ford based Dover marine engines where a Jabsco Raw Water pump is fitted. We stock a wide range of Ford Marine Diesel engine spares including parts for Mermaid, Sabre, Lehman, Watermota and many others...

Water pump drive gear for Ford Dorset 4 cylinder and 6 cylinder diesel engines. Fits most Ford based Dorset marine engines where a Jabsco Raw Water pump is fitted. We stock a wide range of Ford Marine Diesel engine spares including parts for Mermaid, Sabre, Lehman, Watermota and many others...

BMC 1.5 Fresh water ciculating pump, this is the 4 bolt pulley type with a 58mm impeller. We stock a wide range of spares for BMC engines please phone for details prices do not include freight and VAT. Please note this is the engine circulating pump....

BMC 4/98 and 6/98 fresh water pump 4 bolt pulley. Prices do not include freight and VAT, we stock a wide range of BMC marine engine parts please phone for details....

R&D flexible flange coupling 5" standard type, easy to install, reduces engine noise and vibration. Electrical continuity available. A vailable for higher horsepower applicatoins please phone for details. We stock most common sizes of flexible couplings please phone for details. Please ask for more information and technical advice from our...

Tonval Bronze plain skin fitting, seacock, internal strainer and hose tail assembly. Suitable for raw water inlet on wood and GRP boats, 16mm hose sizes (other sizes available please phone for details) we stock a wide range of instalation products, suitable for most makes, please phone for more details, Prices...

Bronze rubber necked gland for 1" shaft adjustable stern gland easy to install. Fits 1.75" stern tube replaceable packing. Remote greaser recomended, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Reverse Clutch Piston For Borg Warner Velvet Drive marine gearbox. Part number is 71-35, fits 71 and 72C type gearboxes. Prices do not include Freight and VAT. We stock most parts for Borg Warner Velvet Drive marine gearboxes from oil seals to complete new units, please phone for details....

Clutch pack PRM 150 part number MT0436. We stock a wide range of parts for most models of PRM Newage gearboxes as well as complete units, please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY...

BMC 1.5 Fresh water ciculating pump, this is the 3 bolt pulley type with a 70mm impeller. We stock a wide range of spares for BMC engines please phone for details prices do not include freight and VAT. Please note this is the engine circulating pump....

Ford flange adapters, allows the use of Dorset manifold on Dover non Turbo Blocks, Easy to fit and saves the expense of fitting a new manifold when fitting a dover engine in place of a Dorset,in stock ready for despatch. We stock a wide range of engine spares for Ford...

Bronze rubber necked gland for 1.25" shaft adjustable stern gland easy to install. Fits 2" stern tube replaceable packing. Remote greaser recomended, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Output Flange for Borg Warner Velvet Drive fits 71C Direct drive units, Part number 4547BA. This is a 4" flange with 4 holes on 3-1/4" PCD, 10 Spline, 1-15/16" diameter seal face. Prices do not include freight and VAT. We stock most parts for Borg Warner Velvet Drive marine gearboxes...

R and D Marine rope cutter, designed to stop ropes jamming between the cutless bearing and the propeller. Smooth cutting action. Minimal interference to water flow and propeller performance. Stainless steel, very easy to install. Available to suit all shaft sizes. Please ask for more information and technical advice from...

R and D Marine rope cutter, designed to stop ropes jamming between the cutless bearing and the propeller. Smooth cutting action. Minimal interference to water flow and propeller performance. Stainless steel, very easy to install. Available to suit all shaft sizes. Please ask for more information and technical advice from...

R and D Marine rope cutter, designed to stop ropes jamming between the cutless bearing and the propeller. Smooth cutting action. Minimal interference to water flow and propeller performance. Stainless steel, very easy to install. Available to suit all shaft sizes....

Fuel line filter assembly, fits type 500 elements, No Spill Element change clear bowl, water drain 5/16" or 3/8" conections (please state) Highly recommended as a retro fit item suitable for all makes of marine diesel engine, easy, quick and clean element replacement makes this filter assembly a must have...

New 12 volt 70 amp alternator earth return, standard euro frame and mount single vee pulley fits a range of engines including Ford, Sabre, Mermaid and many others, in stock and available for immediate despatch. Prices do not include freight and VAT. We stock a wide range of marine engine...

BMC 1.5 Fresh water ciculating pump, this is the 4 bolt pulley type with a 58mm impeller. We stock a wide range of spares for BMC engines please phone for details prices do not include freight and VAT. Please note this is the engine circulating pump....

BMC 2.2 and 2.5 Fresh water ciculating pump, this is the 4 bolt pulley type. We stock a wide range of spares for BMC engines please phone for details prices do not include freight and VAT. Please note this is the engine circulating pump....

Perkins 4108 gasket sets, complete full engine overhaul kits, available from stock, we stock a wide range of Perkins Marine engine parts as well as parts for other makes including Ford, Cummins, Mermaid, Sabre, Watermota and many others, please phone for details. Prices do not include freight and VAT....

Gearbox Pressure gauge and sender 350psi (can be sold seperately) 12 volt standard earth return (24v/12v dropper £6.00) Can be fitted to most makes of Hydraulic gearbox including PRM and Borg Warner, Please phone for details. Prices do not include freight and VAT....

Stern Powr 100 marine drive system spare parts, Part Number 19 M 9, Rubber Boot ( clips sold seperately see part number 830407 ) Prices do not include VAT, we stock a wide range of stern powr spares from nuts and bolts to complete new units please phone for details....

Inland Waterways, canal boats low pressure fuel pipe kits, to suit fuel filter mounted remote from engine room, including feed and return hoses to ISO 7840 and non return valve. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on...

R and D Marine rope cutter, designed to stop ropes jamming between the cutless bearing and the propeller. Smooth cutting action. Minimal interference to water flow and propeller performance. Stainless steel, very easy to install. Available to suit all shaft sizes. Packing, Freight and V.A.T. Extra on all U.K. &...

Jabsco raw water pump foot mounted with BSP threaded ports, 3/8" Bronze pump. We stock a wide range of Jabsco Pumps as well as service parts including immpellers, wear plates and end cover please phone for details. Prices do not include carriage and VAT....

Bronze rubber necked gland for 1.5" shaft adjustable stern gland easy to install. Fits 2.25" stern tube replaceable packing. Remote greaser recomended, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

R and D Marine rope cutter, designed to stop ropes jamming between the cutless bearing and the propeller. Smooth cutting action. Minimal interference to water flow and propeller performance. Stainless steel, very easy to install. Available to suit all shaft sizes.Packing, Freight and V.A.T. Extra on all U.K. & E.C....

R and D Marine rope cutter, designed to stop ropes jamming between the cutless bearing and the propeller. Smooth cutting action. Minimal interference to water flow and propeller performance. Stainless steel, very easy to install. Available to suit all shaft sizes. Packing, Freight and V.A.T. Extra on all U.K. &...

0.75" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and keyed plain end to suit clamp type coupling 1.2 metres long ( add £7.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

Prop Protector rope cutter fits 1.75" shaft, Disc type rope cutter, efective and easy to install, simple reliable disc type rope cutter. Clamp on so can be fitted with the propeller in place. Razor sharp 316 stainless steel construction, no moving parts to service or fail. New and in stock...

Large 3" water lock, very sturdy constrution. Can be fitted to a wide range where wet exhaust is used. Fits 3-4" hose, in stock ready for immediate despatch. Measures aproximately 800mm long including hose connections 300mm wide 400mm high maximum measurements, we have a wide range of parts for all...

Ford Marine Engine Parts, Complete engine overhaul gasket sets for Ford 2700 series 6 cylinder marine diesel engines,also suitable for Lehman, C Power, Sabre, Mermaid, Watermota Ford Diesels we stock parts for most Ford Marine engines, Please phone for details, we also have gasket sets for 4 cylinder 2700 series...

Engine controls twin lever single function, chrome finish top mount, suitable replacements for Morse can be used on a wide range of marine applications, when seperate throttle and gear control are required. Easy to install and fits standard 33c type cables. We stock parts for most makes please phone for...

Output Flange for Borg Warner Velvet Drive 72C current models. Part number 10-00-031-001, 5" flange with 4 holes on a 4-3/4"PCD 26 spline and 2-1/2" seal face. Prices do not include freight or VAT. We stock most parts for Borg warner Velvet Drive gearboxes please phone for details....

12 Volt standard earth return starter motor, fits Ford 4D, 6D 2700 series and 2720 series marine diesel engines, these are new units in stock ready for despatch. We stock a wide range of engine spares for Ford and other makes please phone for details. Prices do not include freight...

Clutch pack PRM 260, also fits 100, 140, 160 part number MT0079. We stock a wide range of parts for most models of PRM Newage gearboxes as well as complete units, please phone for details Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria...

1" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and keyed plain end to suit clamp type coupling 1.2 metres long ( add £12.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

We have the range of Deep Sea Seals, manufactured by Wartsila, in stock from shaft diameter from 1" to 2" (25mm to 50mm. Check the seal regularly, and phone us with any sterngear or shaft seal queries. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine...

Propeller shaft sterntube seals for small craft Manecraft Deep sea seal assembly Set 2 for shaft size 25-30mm and tube size 35-43mm. Manufactured by Wartsila. Add £12 if HS insert is required. We stock a wide selection of sizes, Please phone for details. Packing, Freight and V.A.T. Extra on all...

Propeller shaft sterntube seals for small craft Manecraft Deep sea seal assembly Set 3 for shaft size 25-30mm and tube size 43-51mm.Add £12 if HS insert is required. We stock a wide selection of sizes, Please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales....

Fresh water engine circulating pump, fits Ford Dover series Engines Dual inlet + outlet, single Vee Pulley, also fitted to Mermaid, Sabre, Watermota and Lehman engines. We stock a wide range of engine spares for Ford and other makes please phone for details. Prices do not include freight and VAT....

Output Flange for Borg Warner 72C old type gearboxes with the 6 bolt bearing retaining flange except 2.57:1 and 2.91:1 ratios. Part number 4547AY, 5" diameter flange with 4 holes on a 4-1/4" PCD, 10 spline and an 1-15/16" seal face. Prices do not include freight and VAT. We stock...

Borg Warner Control valve assembly,part number 71-A244A, fits Borg Warner Marine transmissions types 70, 71 and 72C. We stock a wide range of Borg Warner marine transmission spare parts, Including complete new units, Please phone for details. Prices do not include freight and VAT. We can ship to most places...

Forward Clutch Pack For Borg Warner Velvet Drive Marine Gearbox. Suitable for 70, 71 and 72C type gearboxes, direct drive and reduction. Kit contains 2 clutch pressure plate (front and back) 6 steel plates and 7 friction plates part number is A4867AB. Prices do not include freight and VAT. We...

New starter motor 12 volt standard earth return fits Ford 1.6 and 1.8 diesel engines (XLD) Ford R92AX 11000 HB1 1 416 218. Prices do not include freight and VAT, we stock a wide range of spares for Ford diesel engines as well as other makes such as Perkins, Cummins,...

Propeller shaft sterntube seals for small craft Manecraft Deep sea seal assembly Set EM5 for shaft size 30-35mm and tube size 51-60mm.Add £12 if HS insert is required. We stock a wide selection of sizes, Please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales....

Propeller shaft sterntube seals for small craft Manecraft Deep sea seal assembly Set EM4 for shaft size 30-35mm and tube size 43-51mm.Add £12 if HS insert is required. We stock a wide selection of sizes, Please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales....

Clutch pack PRM 302, 402, 500 & 750 part number MT0349. We stock a wide range of parts for most models of PRM Newage gearboxes as well as complete units, please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road...

New Michigan Wheel props bored keyed and balanced. We have a selection of propellors in stock. Also we are able to calculate the best prop for your boat and application. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on...

Perkins Marine Engine Parts, Raw water pump for Perkins 4108, Jabsco number 3270-200, this is the original type, bolts onto timing case, new and in stock ready for despatch. We stock a wide range of parts for Perkins marine engines as well as other makes such as Ford, Cummins, Mermaid,...

Ford fresh water circulating pumps, fits Dover series engines, dual inlet with bolt on pulley, also used on Mermaid, Sabre, Watermota and many others. These are new units in stock ready for despatch. We stock a wide range of engine spares for Ford and other makes please phone for details....

Propeller shaft sterntube seals for small craft Manecraft Deep sea seal assembly Set EM 6 for shaft size 35-41mm and tube size 51-60mm.Add £12 if HS insert is required. We stock a wide selection of sizes, Please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C....

Replacement starter fits in place of the old unit but body of starter is larger in diameter. Original list price £284.Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

1.25" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and keyed plain end to suit clamp type coupling 1.2 metres long ( add £19.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

Jabsco Raw water pump part number 29440-1001, 1" ports, crankshaft mounted raw water pump. Fits a wide range of marine engines, can be supplied with crank shaft mounting adapter to enable the pump to be fitted and driven on a wide range of 4 cylinder marine engines. We stock most...

We can supply marine propellers to suit your requirements, Radice propellers can usually be supplied within 14 days. Prices start from £215.00. Prices are based on availability of pattern equipment in the required pitch and diameter. Prices include taper, bore and and keyway to standard 1:12 or 1:16 for Imperial...

We can supply marine propellers to suit your reguirements, Radice propellers can usually be supplied within 14 days. Prices start from £225.00. Prices are based on availability of pattern equipment in the required pitch and diameter. Prices include taper, bore and and keyway to standard 1:12 or 1:16 for Imperial...

Clutch pack PRM 1000 part number MT0432. We stock a wide range of parts for most models of PRM Newage gearboxes as well as complete units, please phone for details. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY...

Bronze rubber necked gland for 2" shaft adjustable stern gland easy to install. Fits 3" stern tube replaceable packing. Remote greaser recomended, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Bronze rubber necked gland for 1.75" shaft adjustable stern gland easy to install. Fits 2.75" stern tube replaceable packing. Remote greaser recomended, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Jabsco Raw water pump part number 29620-2001 this is a 1" bronze pump with threaded ports, fits 6 cylinder New Holland Turbo Marine diesel engines. Gear wheels are available as a seperate item if required please state engine model when ordering. The backplate on this pump measures 3-3/8". We stock...

We have in stock Ford sea water pumps, that also fit the four cylinders 2712E and 2722E. They have been used by numerous Ford engine marinisers over the years, including Lehman, CT Marine, Watermota, C Power, Mermaid, Sabre, Mercraft, Econopower, British Polar, BHK Denmark, Dolphin, Holstema, Isotta, Leyland Thornycroft, J.G.Meakes,...

Jabsco Raw water pump part number 10950-2401 this is a 3/4" bronze pump with threaded parts, fits a wide range of Ford 4 Cylinder and 6 cylinder Dover and Dorset Marine diesel engines including Sabre, Mermaid, Watermota and many others. Gear wheels are available as a seperate item if required...

Available from stock, Morse style Marine Engine controls. Chrome, Top mount for twin engine Dual Control. Will replace existing Morse controls, High quality Chrome finish. We stock a large range of marine control and Installation products to suit commercial boatbuilders and DIY enthusiasts alike, please phone for details. Prices do...

1.5" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and Keyed plain end to suit clamp type coupling 1.2 metres long ( add £27.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

Jabsco Raw water pump part number 21140-2401 this is a 1" bronze pump with threaded ports, fits a wide range of Ford 6 cylinder (and some 4 cylinder) Dover and Dorset Marine diesel engines including Sabre, Mermaid, Watermota, Naturally aspirated, Turbo, and many others. Gear wheels are available as a...

Raw water pump complete with mount and drive to fit Ford XLD (Escort) Diesel engines fits 1.6 and 1.8 engines (please state as mountings are different) we stock a wide range of parts for Ford Based Marine Engines, including makes such as Mermaid, Lehman, Sabre, Watermota and many more please...

Jabsco Raw Water Pump Part Number 29440-1001 and mounting kit for BMC Leyland 2.2 and 2.5(please state when ordering and please also note how many holes secure the fresh water pump pulley) Enables the pump to be driven directly of the fresh water pump. We stock a full range range...

Raw water pump and drive for Peugeot XD2/3 404/505 Sierra diesel engines pump number 29440-1001 (can be sold seperately)replaces 22960-1001, This kit allows the pump to be driven directly of the fgresh water pump pulley. We stock other marinising parts for these engines please phone for details.We also stock replacment...

Raw Water Pump Mount and drive to fit Perkins 4107-4108 engine pump number 29440-1001 replaces 22960-1001. This kit enables the pump to be driven directly off the fresh water pump (not to be confused with the 3720-200, we also stock this pump) we stock marinising parts and core engine parts...

Perkins 3.152 Raw water pump mount and drive,Jabsco pump number 29440-1001, This kit allows the raw water pump to be driven directly off the fresh water pump comes complete with mount and fixings easy to install. We stock a whole range of marinising componenets for Perkins engines Please phone for...

Raw Water pump Mount and drive for Mercedes OM636 diesel engine. Pump number is Jabsco29440-1001 (can be sold seperately) enables pump to be mounted and driven off the fresh water pump. Replaces 22960-1001, we stock a range of marinising componenets for these engines please phone for details.We also stock replacment...

Raw water Pump Mount and Drive For Mercedes engines pump number 29440-1001 (can be sold seperately) replaces 22960-1001 Kit includes mount and drive, enabling pump to be driven off the fresh water pump. Available for the following Mercedes engines OM321/615/616 Sprinter 601/602/603. We have other marinising parts in stock for...

Raw Water Pump Mount and Drive For Peugeot XUD 7/9 Diesel engine Pump number 29440-1001 (replaces 22960-1001) kit enables pump to be driven off the fresh water pump. We stock other marinising parts for this engine please phone for details.We also stock replacment parts for other makes including Ford, Mermaid,...

Jabsco Raw Water Pump Part Number 29440-1001 and mounting kit for BMC Leyland 1.5 and 1.8 (please state when ordering and please also note how many holes secure the fresh water pump pulley) Enables the pump to be driven directly of the fresh water pump. We stock a full range...

Jabsco Raw Water Pump Part Number 29440-1001 and mounting kit for Rover Montego/Maestro diesel engine, Enables the pump to be driven directly of the fresh water pump pulley. We can Supply a range of marinising parts for the Montego and Maestro Diesel engines please phone for details Price do not...

Raw Water Pump mount and drive for Ford FSD 2.5 Diesel engine (Transit 2.5)mounts and drives off the idler pulley, Pump supplied is a Jabsco 29440-1001 (can be sold seperately) We stock a wide range of parts for Ford Based marine engines including parts for Mermaid, Sabre, Lehman, Watermota and...

1.75" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and Keyed plain end to suit clamp type coupling 1.2 metres long ( add £38.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

Perkins Marine Engine Parts, Original 9990-41 Jabsco Raw Water pump fits Perkins 6-354 diesel engine. We stock a wide range of Perkins Marine Engine parts as well as parts for Ford, Cummins, Mermaid, Sabre, Watermota and many more Please phone for details. Prices do not include Freight and VAT....

Perkins aftermarket turbo adapter manifold, for 6354T marine diesel engines and 6354HT engines. Aditional information will be required when ordering this part. We can provide a large range of aftermarket Turbo adapters and exhaust outlets. Old samples may be required as patterns for some applications, Please phone for details. Prices...

Complete new boxed with drive gear, threaded 3/4" bsp. Four bolt flange. List price £397. Perkins part number 2488322 We have a complete range of Perkins original and aftermarket parts listed on page 16 of the Price Book. See our website or ask for a hard copy. Please ask for...

Jabsco Raw water pump Part number 22740-0451 includes mount and drive for Chevrolet V8 Diesel Engine. We have marinising parts for chevrolet diesel engines in stock Please phone for details. We stock parts for most makes of marine engines including Ford, Sabre, Mermaid, Lehman, Watermota, Perkins, Cummins, Leyland, Thornycroft and...

2" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and Keyed plain end to suit clamp type coupling 1.2 metres long ( add £49.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

Bronze rubber necked gland for 2.25" shaft adjustable stern gland easy to install. Replaceable packing. Remote greaser recomended, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Rope cutter Ambassador Marine type AM15 for 40mm shaft this is a 3 serated blade type, new and in stock ready for immediate despatch, competitavely priced only one left in stock please phone for details. We have a large range of Marine parts including stern gear and engine Spares for...

Ring Gear (forward clutch housing) Borg Warner Velvet Drive for 72C gearboxes 10-18. Part number (was 72-6) 10-16-162-001. Prices do not include Freight and VAT. We stock most parts for Borg Warner Velvet Drive from oil seals to complete new units, please phone for details....

2.25" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and Keyed plain end to suit clamp type coupling 1.2 metres long ( add £61.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

De smoking Service available for Ford marine diesel engines. 150- 300hp 6 cylinder turbo engines. Reduce white smoke on start up and tickover, includes top end overhaul of injection pump. We stock a wide range of spares for Ford Marine engines please phone for details. Please ask for more information...

PRM MARINE, formerly Newage Transmissions, PRM120 gearbox List price £687. Similar to HBW100, HBW10, HBW125, same input and output facing, different length, in stock, 1 Years warranty. For further information please contact us. Subject to remaining unsold. Please ask for more information and technical advice from our resident engineers and...

Ring Gear (forward clutch housing) Borg Warner Velvet Drive for 71C gearboxes 10-17. Part number 71-6. Prices do not include Freight and VAT. We stock most parts for Borg Warner Velvet Drive from oil seals to complete new units, please phone for details....

A selection of air coolers in stock for Perkins ford and Cummins engines. Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Marine Gearbox ZF10M 2R part number 3304002010 these are new gearboxes in stock now and reasdy for immediate despatch we stock a wide range of marine gearboxes please call for details. Prices do not include freight and VAT. We can ship marine spares to most parts of the world....

2.5" Marine propeller shafts, 316 stainless steel supplied with keys washer and nut. Standard taper to suit propeller and Keyed plain end to suit clamp type coupling 1.2 metres long ( add £77.00 for every extra 30cm up to 3 metre, longer than 3m available POA) details of taper will...

Lehman 4cyl 2712E parts available oil coolers, anodes, gearbox, starter motor, gaskets, fresh water pump and many other parts in stock.Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

We have a small stock of new turbochargers suitable for 150- 180 hp applications non intercooled. Perkins part number is 2674A080. We can supply and repair most makes of turbocharger please phone for details. Price do not include VAT...

New Perkins 4108 Cylinder Heads complete with valves, springs and chamber caps, In stock ready for despatch today. We stock a large range off Perkins engine spares Phone now for details. Prices do not include Freight and VAT...

We have marinising and base engine parts for the Lehman diesel engine range based on the 2712E, 2715E and 2704ETPacking, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

We have in stock water cooled exhaust manifolds for the Ford 3 litre V6. Priced per pair. Exhaust outlets for above. Also Exhaust Manifolds for the 2.8 litre two port V6 engines.Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41...

Gearbox removed from a new engine. List price £1270 plus V.A.T.. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

We have in stock replacement cast iron exhaust manifolds, original part numbers 84504, 89058, ZZ90054, gaskets and studds available. Also replace manifold to turbo adaptor on HT6354 in place of the 3776600. Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex...

Aftermarket exhaust manifold Packing, Freight and V.A.T. Extra on all U.K. & E.C. Sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

Stern Powr 100 series drive spares, Part number 830811 steering cylinder, we stock a wide range of spare parts for Stern Powr Drives, from nuts and bolts to complete units, please phone for details. Prices do not include Freight and VAT....

Stern Power 100 series drive systems, part number 830808 Hydraulic lift and trim cylinder. We stock most parts for stern powr drive systems from nuts and bolts to complete new units, please phone for details. Prices do not include freight and VAT....

Perkins Heat Exchanger for Marine Engines M50 M60 and M80, Original part number 4133Y022, These are complete new units including end caps (not shown in photograph) we stock a range of Perkins spare parts and we receive new stock on a regular basis please phone for details. Prices do not...

We have in stock a number of PRM gearboxes and spare parts for the whole range, PRM80 PRM120 PRM260 PRM750 PRM1000, various ratios. We can repair units with oil filters fitted to the later types with P.T.O.'s and trolling valves attached. Subject to remaining unsold. Please ask for more information...

Brand new gearbox available. It has a very deep drop of 151mm, 6", for difficult engine installations. Can supply adaptors, driveplates, couplings & sterngear to fit this marine transmission. Please ask for more information and technical advice from our resident engineers and boatbuilders. Plus freight and V.A.T.Packing, Freight and V.A.T....

We have a pair of ZF85 IV marine gearboxes reference numbers 3323 003 012, new in box ready for despatch with original ZF warranty. The units have 24volt electric shift. Mechancal shift available extra. Maximum power rating pleasure 280hp at 2500rpm. List price £4953. Drive couplings and adpators plates can...

New Marine Gearbox ZF63A 2:1 Part Number 3312001017 can be fitted to Volvo, Ford, Perkins and Yanmar Marine engines.In stock and ready for immediate despatch, We stock a large range of marine gearboxes please phone for details, we can despatch marine spares to most parts of the world. Prices do...

New Marine Gearbox ZF63A 1.5:1 Part Number 3312001016 can be fitted to Volvo, Ford, Perkins and Yanmar Marine engines.In stock and ready for immediate despatch, We stock a large range of marine gearboxes please phone for details, we can despatch marine spares to most parts of the world. Prices do...

Marine Gearbox PRM1000D2 2:1 New Gearbox, this is a drop centre unit available now for immediate despatch, we stock a large range of marine gearboxes please phone for details.We have in stock a number of PRM gearboxes and spare parts for the whole range, PRM80 PRM120 PRM260 PRM750 PRM1000, various...

Marine Gearbox PRM1000D1.5 1.5:1 New Gearbox, this is a drop centre unit available now for immediate despatch. We have in stock a number of PRM gearboxes and spare parts for the whole range, PRM80 PRM120 PRM260 PRM750 PRM1000, various ratios. We can repair units with oil filters fitted, to the...

Marine Gearbox PRM1000D3 3:1Ratio, New Gearbox, this is a drop centre unit available now for immediate despatch. We have in stock a number of PRM gearboxes and spare parts for the whole range, PRM80 PRM120 PRM260 PRM750 PRM1000, various ratios. We can repair units with oil filters fitted, to the...

New gearbox from stock 10 18 008 2.1:1 for left hand prop. Also have available the model for the right hand prop 1.91:1 or the 1.88:1 10 18 000 106 price £2980. Prices are subject to variations in the Dollar exchange rate. PRM also manufacture a inline replacement gearbox for...

New marine gearbox, Part Number 3205001022, with factory warranty, ready for immediate despatch U.K. Or World wide. Fitted to Ford, Perkins, Volvo, Cummins, Yanmar and many other marine diesel engines. Please ask for more information and technical advice from our resident engineers and boatbuilders. Packing, Freight and V.A.T. Extra on...

Marine Gearbox PRM1000A 2:1 ratio, New Gearbox, this is a 10 degree angle unit, available now for immediate despatch. We have in stock a number of PRM gearboxes and spare parts for the whole range, PRM80 PRM120 PRM260 PRM750 PRM1000, various ratios. We can repair units with oil filters fitted,...

Marine Gearbox PRM1000A 1.5:1 ratio, New Gearbox, this is a 10 degree angle unit available now for immediate despatch. We have in stock a number of PRM gearboxes and spare parts for the whole range, PRM80 PRM120 PRM260 PRM750 PRM1000, various ratios. We can repair units with oil filters fitted,...

New Ford 2725E built by (Lansing) Lancing marine, Lancing Marine UK, replacement for 2715E 120hp. Fitted with exhaust manifold, heat exchanger, exhaust outlet, fresh and sea water pumps, thermostat housing, test run and painted. You can reduce the price by using own mounts and bellhousing. This ensures there are no...

Full marinising kits to fit an ex vehicle diesel engine onto a petrol driven Volvo sterndrive. The most economical and quiet diesel is the Ford 1.8 Litre diesel. We have designed an adaptor plate that goes between the Ford block and the red Volvo bellhousing fitted to B20 and B23...

We have an aftermarket supply of this oil cooler for the 6 cyl Yanmar engine MODEL 6LP-STE. List price £1260Packing, Freight and V.A.T. extra on all U.K. & E.C. sales. Lancing Marine 51 Victoria Road Portslade Sussex BN41 1XY United Kingdom...

New engine ready for Borg Warner or ZF gearbox. Power (crankshaft) 232 kW (315 hp) @ 3800 rpm Continuous rating (crankshaft) 188 kW (255 hp) @ 3600 rpm Displacement 4.163 litres Bore x stroke 94 mm x 100 mm Cylinders 6 in line Valves 4 valves per cylinder Combustion system...