This Hallberg Rassy 42 is an original (Rassy/Enderlein), sloop rigged, version of the popular GRP long-distance cruising HR42 marque and has successfully completed two circumnavigations. The second of these, with the current owners, was mostly two-handed and covered over 60,000 nautical miles. She is for sale with much regret as the owners now feel that they have reached a stage in their lives when long-distance cruising is behind them. 'Sea Bunny' is well equipped for ocean cruising but is equally at home in local waters.
GRP moulded hull and deck with encapsulated iron ballast in long fin keel
Rudder supported by 3/4 depth skeg.
Sacrificial shoe fitted to lower part of keel and wire from keel to skeg.
Teak covering on deck replaced 2009 (Thailand).
All hatches understood to have been replaced 1997 (Trinidad)
Topsides repainted 2016 in Trinidad (except blue stripe - 2012 in Thailand)
Coppercoat antifoul system applied 2012 (Thailand) , touched up 2016 (Trinidad).
General refits undertaken in 1997 (by previous owner), 2001 (UK), 2009 and 2012 (Thailand) and 2016 (Trinidad).
Lofrans electric anchor windlass (2008) with veer and haul foot controls. Motor replaced
Pressurised anchor/deck wash.
45lb CQR anchor mounted in bow roller, with 60 m 10 mm chain in anchor well. Nylon snubber.
Large Danforth anchor.
60 m additional 10 mm chain, stored in bilge
60 m 18mm nylon octoplait anchor warp
Aries demountable wind vane.NB: this unit has not been fully tested with the aft gantry in place. Anchor well:
Sealed from accommodation and with drain to outside containing:
main anchor chain;
Changeover system for 2 LPG bottles.
LPG regulator 2016
1 x aluminium 5kg LPG bottles (NZ 2003, tested South Africa 2016) with new US POL valves 2016 (2nd similar available free if required). Difficult to fill in UK
2 “pigtails” with US POL male fittings, 1 “pigtail” with UK POL fitting
At present the LPG system is configured to use a 6 kg Calor propane tank with one of the aluminium tanks connected to the changeover system as spare. Large cockpit locker
Ample space for warps etc. Lazarette
Ample space for fenders etc.
SSB tuner unit mounted in here Other equipment:
Telescopic boat hook
6 fenders and various mooring lines and warps
2 hose pipes. 1 used exclusively for fresh water
Aft gantry with davits for tender and mounting for antennae, solar panels and wind generators. Gantry height set to allow Aries self-steering windvane to operate under it. Guardrails
Stainless steel pulpit.
Stainless steel guardrails from cockpit aft. Split for access to bathing platform at stern,
with stainless steel chain to secure gap.
Twin stainless steel guardrail wires with opening gate sections.
Mounting for liferaft recessed into alt rails on port side.
2 teak pads on aft rails for outboard engine storage.
Stainless steel frame with teak boards and folding bathing ladder.
Transom mounted steps to platform
Bathing shower with hot & cold water mounted in teak box on aft deck
Volvo Penta MD22P 44kW (57hp) (2001).
ZF-Hurth ZF25MA gearbox with 8 degree down angle shaft drive (November 2008)
Brunton Autoprop H6 self pitching propeller rebladed 2006 on fitting new gearbox. Factory service 2019.
Rope cutter and shaft anode
Cutlass bearing replaced 2019.
Spare fixed blade propeller carried as spare.
350 litres across two tanks Batteries:
Two independent 12v battery banks.
Engine start AGM battery of 90 A-Hrs (2014)
Domestic battery bank of 6 x 95 -Hrs (2015) Trojan gel batteries (total 570 Ah).
Linklite battery condition monitor (2011).
All batteries are installed under aft cabin bunks with substantial hold-downs.
Engine battery is charged by dedicated engine-mounted 60 A alternator.
Domestic bank is charged by Balmar 160A engine driven alternator (2010) through Balmar MC-614 intelligent regulator;
Victron 2000VA/80A, (2012) for charging domestic battery (up to 80 A depending on battery state) and supplying 240V AC from battery (up to 2 kVA) when shore power is not available.
30A AC pass-through when connected to shore power.
Inverter will supplement shore power if demand exceeds a limit set on the control unit.
220/240 V shore power circuit with galvanic isolation, earth leakage and overload protection.
AC sockets throughout boat, mostly universal type accepting UK, continental, US and Australia/NZ plugs.
12V DC sockets in galley and navigation area.
At present not equipped wit a generator however, there is space and a platform for one in the engine compartment..Service access to genset area, calorifier and starboard side of engine through removable section of cockpit locker floor. Alternative 'green' Power Sources:
2 x Silentwind (2012 & 2015) wind generators. Control boxes mounted in aft heads
2 x 135W Kyocera solar panels 2009. MPPT controller for maximum efficiency.
Spars and Rigging
Silver anodised Masthead sloop rig by SELDEN with two pairs of spreaders and stainless steel standing rigging (forestay 2014, caps, intermediates, lowers & backstay 2016):
Running backstays Dymeema to 4 part purchase (2016);
Mast steps to upper spreaders 2001;
Slab reefing (3 reefs) to main controlled at mast base;
Carbon fibre spinnaker pole (new 2001) mounted on mast;
Second (alloy) spinnaker pole on deck. Mounts with separate car on track for twin pole
Separate track on mast for trysail;
Reckmann twin groove furling forestay;
Additional removable forestay for storm jib;
Frederiksen ball slide cars on main track;
Lazy jack system including mainsail cover 2013;
Scott Boomlock preventer system;
Main halyard length (sail head to winch) 31 m + 6 m = 37 m;
Genoa halyard length (drum to winch) = 31.9 m +1.1 m = 33 m
Mainsail foot 4.5 m
Fully battened mainsail by Ullman Sails South Africa 2016.
Ronstan Battenslide system, most cars new 2016.
Triradial furling genoa by Rolly Tasker (Phuket) 2011. Sacrificial strip replaced 2018.
Storm jib sets on detachable forestay (Hank on), original but little used.
Trysail, sets on own track on mast. Believed original – never used by present owners.
Hoods triradial spinnaker with snuffer 2001, little used.
Cruising chute with snuffer. Believed original, little used by present owners.
Twin headsail rig system, sets on twin groove foil using separate halyard block on top swivel to allow luff of both sails to be independently tensioned.
Hoods Running jib by Hoods 2001
No 1 jib. Believed original. Only used by present owners as part of twin-headsail running rig.
Spray-hood 2008, clear panel replaced 2016
Mast to stern awning (2005) extensions to bow and stern (2009)
Shaped cockpit cushions (2009)
Cockpit enclosure/bimini canvas 2013, clear and net sidescreens
B & G Hydra wind speed, wind direction (updated 2001, 2010)
Furuno GP32 GPS 2003. Provides position to Raymarine.
Raymarine DSM30 with tridata transducer for depth (fishfinder), speed/log and water temperature 2012
Raymarine 18" digital radome 2011 factory serviced 2015.
Raymarine AIS650 Class B AIS transceiver (2016) Silent mode activated from switch or chart plotter 2011
Raymarine E120W chart plotter 2011 with Navionics Gold Western Europe charts (renewed until October 2020)
Raymarine Evolution autopilot with P70 control head and EV1 sensor (also provides fast heading data to chartplotter/AIS).
Autopilot uses linear drive unit to steering quadrant independently of steering cables 2014
GPS, B&G interfaced to E120W via Actisense NMEA multiplexer, GPS linked to VHF DSC via NMEA
Radome and DSM30 linked to E120W via Raymarine Seatalk HS multiplexer and network
Autohelm and AIS linked to and controlled from E120W via Seatalk NG bus Communications:
Icom IC-MC501 EURO (2001) marine band VHF transceiver and Icom DS-100 DSC controller linked to GPS
VTronix cockpit speaker for VHF (replaced with new 2019)
Icom IC-M710 marine band MF/HF transceiver (2001)
Thrane & Thrane TT-3022D Inmarsat-C transceiver (2001) with integral GPS. Requires connection to computer and appropriate software. May also require airtime contract.
Furuno Navtex receiver (2001)
Old Autohelm wired via changeover switch for use with existing linear drive in case of main Autohelm system failure. Note that the display on the control head is deteriorated but control functions are believed to be functional. Non electronc equipment:
Suunto D-135 steering compass in pedestal replaced 2012. Usable world-wide.
Windex wind direction indicator
UKHO small craft folios covering Scillies to Solent and Channel Isles
Seven berths in two cabins plus saloon.The inside of the hull moulding is lined with varnished mahogany slats to create an air barrier between the accommodation and the GRP. This gives excellent ventilation to all parts of the boat and helps to prevent the smells and mould caused by damp. Locker fronts are louvered, bunk boards are drilled.
Mikunu warm air system ducted to cabins and heads, (ducting renewed 2014). Main unit serviced by UK agent 2018.
8000 BTU/hr built-in air conditioner to main cabin 2009 (usable when on shore power). Sea water cooled.
Engine compartment extractor fan
Soft furnishings are upholstered in Warwick Microsuede deluxe fabric 2010.
Head linings throughout relined 2009.
Flooring revarnished 2012 and lock-downs fitted
Portlights rubber seals replaced 2016
Main lighting throughout by Alpenglow fluorescent lights, 2 x intensity white and red.
Some Alpenglows converted to LED in same housings
LED reading lights above all bunks
Various additional fluorescent and LED lights
Domestic hot water heated by engine calorifier (replaced 2009) and 220v immersion heater (replaced 2015) Forward Cabin:
Traditional style V berths with removable infill. Access to spacious storage beneath berths, currently used for sail and equipment stowage
Good stowage throughout cabin in lockers and drawers above bunks,at both sides and, aft of bunk on starboard side. Large opening deck hatch (1997) Saloon:
L-shaped settee berth to port with lee board, fuel tankage beneath, stowage above.
Straight berth to starboard with lee board, stowage above and below.
Large folding leaf table with bottle stowage in centre.
Pioneer stereo radio-CD player with USB input for iPod and cockpit speakers.
Two opening portlights and two large opening deck hatches.
Electric fans and LED reading lights over each bunk
To starboard of main companionway with Staron work surface (2012)
Double stainless steel sink with hot and cold mixer tap, fresh water hand pump and pumped drainage.
Separate drinking water tap with filter/purifier.
Tap for sea water not connected.
Gimballed Force 10 LPG stove with four burner hob, grill and oven 2000.
Water-cooled 12v fridge 2015 reinsulated 2012
Stowage for ready to use provisions and cooking utensils in lockers and drawers above and below galley area.
Opening portlight and electric fan. Aft cabin:
Two wide 'v' berths with latex mattresses (2012) with storage infill between
Cooling fans above berths.
Cover for infill creates large double berth.
Stowage in lockers and drawers and individual lockers above each bunk.
3 x opening portlights
1 x large opening deck hatch.
Fitted shelves in the full-height hanging locker which it could easily revert to hanging space by removal of the shelves.
Full width double bookshelves aft.
Control for the solar panels is in the portlight area on the starboard side.
Carbon monoxide detector is filled on the forward bulkhead. Forward heads:
Jabsco Quietflush electric head (new macerator pump 2019)
Vanity unit with ceramic wash basin with mirror over
Lockers below and behind basin
Large locker behind head.
Hot and cold water pressurised water
Electric pumped drainage to shower tray and basin Separate shower stall
Opening deck hatch. Aft heads:
Ensuite to aft cabin
Jabsco Quietflush toilet
Vanity unit with ceramic wash hand basin (2013) and mirror over
Hot & cold pressurised water
Shower with push button pumped drainage for shower floor,
Holding tank (located in cockpit locker)
Wind generator controls mounted on shelf behind basin Forward passage:
Large hanging locker with shelf storage
Cupboard and open shelf over. Opening portlight
To port of main companionway.
Forward facing ½ UKHO chart size chart table with chart stowage and drawers below. Book stowage outboard of seat and stowage beneath seat.
Navigation instruments mounted (as listed) ahead and outboard of chart table
Further chart stowage under deckhead behind seat
Electric fan Aft Passage:
Passage aft of the chart table, gives access to a large low-level cupboard currently used for for tool stowage but which, on other HR42s has been converted into a top-entry freezer compartment. Above is a 2-shelf cupboard.
The main DC switch panel is mounted in this area.
Access to the engine compartment is to starboard of the passage.
Water and Tankage
Water maker Spectra DC system 60l/hr 2001 mounted behind bunk on starboard side of main cabin..Clark pump factory refurbished, new membrane & feed head pump 2016
Hot and cold pressurised water system to galley, heads and bathing shower.
Whale Gulper IC Grey water pumps to forward heads and aft heads/galley 2015
Pressurised sea water system piped to anchor locker for anchor and deck washdown.
Water tank: 700 litres - situated under main cabin floor
Autoflug 6-man, last serviced 2014. Normal service interval 2 years. Believed serviceable but NOT GUARANTEED. Fire extinguishers
5 manual in accommodation, (2011), 1 automatic in engine compartment EPIRB
KTI 406 EPIRB integral GPS 2012
EPIRB is registered with UK MCA but will necessarily be deregistered on sale of Sea Bunny. Purchaser will need to register with appropriate national authority. Lifebuoys
2, both with lights and drouges, one with danbuoy MOB rescue equipment
Plastimo rescue harness and line 2001
Tri buckle 2001
Throw line 2001
McMurdo Smartfind personal AIS beacon 2014
Digital Yacht AIS alarm 2014 Jackstays
Webbing, replaced 2011 Bilge Pumps
One Whale Gusher manual pump operated from cockpit
One Whale Gusher manual pump operated from aft cabin
One Whale Gulper Bilge IC automatic bilge pump 2012
One high capacity emergency electric pump 2005. Never used on Sea Bunny but has been passed at sea to 2 other yachts taking on water! Lightning protection
“Bottle brush" lightning dissipator at masthead grounded via shrouds to 2 copper bars on outside of hull (2008) Safety tools
Manual bolt croppers
Subrella hole repair device 2002
Various hardwood plugs
Avon 2.8 m Hypalon RIB (2009) with fitted canvas cover (2010) - For passage-making can stow in bag between mast and cockpit
Tohatsu 9.8 HP two-stroke outboard motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
...Read full description