OtherBoat Accessories & EquipmentFurniture & Hardware
The bolster seat PH2-18 is brought from the professional series. The professional series is rated to two and a half times the impact loads of the recreational series. These are designed for use in military, rescue or racing.
The bolster seats features an all stainless steel tubular frame and fasteners. Heavy marine grade vinyl is used for the upholstery. Each leg has three 1/2 bolts securing it to the deck. Exceeds ABYC Standards.
The following three positions are available:
1, conventional seating (back down and seat base horizontal)
2. Lean into bolster (back down and seat base vertical)
3. Stand up bolster (back up and seat base vertical)
The seat base is changed from one position to the other by gripping the front of the seat base and pivoting it up or down. Pushing on it will release the snap clips holding it. After pivoting, the snap clips will hold it in place. The seat back is moved to the upper position by gripping the side handles and pulling the seat back up and forward until the hooks are engaged and latched. Latches are spring loaded and will engage automatically. To lower the seat back, release the latches, pull the seat back up to disengage the hook, then move it aft while lowering it until the collars drop into their notches....Read full description