• Sailing Boats
  • Motor Boats
  • Small Boats
  • Boat Engines
  • Commercial Boats
  • RIBs and Inflatable Boats
  • Boat Trailers
  • Boat Moorings
  • Other
    All categories
    • All categories
    • Sailing Boats
    • Motor Boats
    • Small Boats
    • Boat Engines
    • Commercial Boats
    • RIBs and Inflatable Boats
    • Boat Trailers
    • Boat Moorings
    • Other
    Please select a location from the drop-down list
    ad ref. BU0400406
    £ 12,000
    negotiable

    Cape yachts - Cape Cutter 19 for sale

    Sailing BoatsYachtsCape yachtsCape Cutter 19

    Description

    ‘Kira’ is an original 2002, South African built, Cape Cutter 19. She has a navy blue hull and an ivory deck. She is gaff rigged with a length of 7.2m, beam of 2.2m and a lifting keel giving a maximum draught of 1.3m and a minimum of just 45cm. The hull is fitted with bearers below the waterline which allow her to dry out. She has 4 berths, two side berths and a triangular forward berth.

    She has spent most of her summers moored in fresh water on the “River Frome” and sailed in and around Poole harbour. Out of season she has been stored under cover in a barn. Since 2019 she has been moored on Coniston Water.

    Having stepped up from sailing dinghies to my first ‘big boat’ I’ve sadly decided to part with her to go back to smaller boats which are easy to beach land.
    She is Gaff rigged and the Main, Staysail and Genoa are all in good condition.

    The original mast was replaced in 2010 with a new mast from Honnor marine, the boom, gaff & bowsprit are all original. The boat and rigging are all in good working order and she comes with a purpose built, winch equipped and fully braked road trailer with brand new tyres.

    She also has a Honda 5HP 4 stroke outboard with a 12 litre remote fuel tank, all purchased in 2009. The engine has only been used for three seasons and is in excellent condition.

    Boat Specification
    Built 2002 owned since 2018, two previous owners
    Hull No. 23 No number on sail (not unusual)
    Blue hull, ivory deck
    River mooring during summer season
    Original trailer with spare wheel, winch and lockable hitch (padlock) & brand new tyres ( I will ensure that this has an up to date service)
    Not SSR registered
    Laid up in barn since season end 2011 and then moored on Coniston Water since 2019
    Had a repair in the rudder and gel coat chips made good between 2007 and 2009 by Poole Yacht Repairs
    Sails
    Manufactured by North
    Genoa with roller reefing and sacrificial strip
    Staysail
    Mainsail and cover
    Engine
    Honda BF 5A 5 horse 4 stroke. (2009), serviced 2019.
    Outboard padlock
    11 litre plastic Honda fuel tank in cockpit side locker
    Deck
    Foredeck Samson post
    Forward escape hatch
    2 Lewmar 6 winches for Genoa
    Canvas pockets fixed to rear of cabin
    Tonneau type cover for cabin sliding hatch/door
    Cockpit sides (aft) mooring cleats
    Bilge pump mounted in cockpit
    Plough type and Danforth type anchors with 7 metres approx chain and 36 metres approx warp
    New anchor recently purchased from Honnor marine
    Cabin
    Lockable hatch
    4 berth. 2 side berths and a double forward
    Hatch above double for ventilation or escape access
    Canvas pockets across cabin rear and on both sides
    Space for a Porta potti
    Plastic water tank approx 5 litres connected to tap/pump with plastic bowl sink
    Basic electrics fitted with 12 volt system
    Specifications
    Vessel type: Cutter
    Builder: Cape Yachts
    Make: Cape Cutter
    Model: 19
    Year constructed: 2002
    Sail number: No number on sail (n
    Berths: 4
    No. of engines: 1
    Engine model: Honda
    Engine hours: 15
    Fuel type: Petrol (Gas)
    Drive type: Outboard
    Length over all: 7.2m
    Beam: 2.2m
    Maximum draft: 1.3m
    Hull material: Glass Fibre
    Hull colour: Navy Blue
    Keel type: Retractable Keel
    Fuel capacity: 12 Litres
    Water capacity: 5 Litres
    Engine(s)
    Honda BF 5A 5 horse 4 stroke. (2009). Has been run this year.
    Outboard padlock
    11 litre plastic Honda fuel tank in cockpit side locker
    Construction
    GRP Hull and Deck
    Accommodation
    Cabin
    Lockable hatch
    4 berth. 2 side berths and a double forward
    Hatch above double for ventilation or escape access
    Canvas pockets across cabin rear and on both sides
    Space for a Porta potti
    Plastic water tank approx 5 litres connected to tap/pump with plastic bowl sink
    Sails & Spars
    She is Gaff rigged and the Main, Staysail and Genoa are all in good condition.
    The original mast was replaced in 2010 with a new mast from Honnor marine, the boom, gaff & bowsprit are all original. The boat and rigging are all in good working order
    Sails
    Manufactured by North
    Genoa with roller reefing and sacrificial strip
    Staysail
    Mainsail and cover
    I’ve really enjoyed owning her but made the decision to revert back to smaller boats.
    She is currently moored on Coniston Water.
    ...Read full description
    SubcategoryYachts
    ManufacturerCape yachts
    ModelCape Cutter 19
    Mooring CountryUnited Kingdom
    CurrencyGBP
    Year built2001
    Conditionvery good
    Sale TypeUsed
    SalePrivate
    Sales statusavailable
    Display map

    Similar sailing boats

    11
    £ 24,950
    SubcategoryYachts
    Mooring CountryUnited Kingdom
    Year built1979
    Length9.75 m/32 ft
    Merseyside, North West
    2
    £ 1,000
    SubcategoryYachts
    Mooring CountryUnited Kingdom
    Year built -
    Length0 m/0 ft
    Tarleton, North West
    2
    £ 1,000
    SubcategoryYachts
    Mooring CountryUnited Kingdom
    Year built -
    Length0 m/0 ft
    Tarleton, North West
    timmsmillar
    Profile page