• Sailing Boats
  • Motor Boats
  • Small Boats
  • Charter Boats
  • Boat Engines
  • Commercial Boats
  • RIBs and Inflatable Boats
  • Boat Trailers
  • Boat Moorings
  • Other
    All categories
    • All categories
    • Sailing Boats
    • Motor Boats
    • Small Boats
    • Boat Engines
    • Commercial Boats
    • RIBs and Inflatable Boats
    • Boat Trailers
    • Boat Moorings
    • Other
    Please select a location from the drop-down list
    £ 34,950
    Contessa - 38
    £ 34,950
    Contessa - 38
    Ancasta Plymouth
    Profile page
    ad ref. BCU9110994
    £ 34,950
    Vat Included / Paid

    Contessa - 38 for sale

    Blue Water CruisersUnited Kingdom197311.58 m/38 ft

    Contessa 38 built in 1973 - A rare opportunity to purchase this classic racing yacht from the 1970s, built by Jeremy Rogers based upon a design by Sparkman and Stephens. One of only six built, she was designed to IOR rules, competing in the 1973 One-Ton cup series. Subsequently converted for cruising, she raced and cruised in Baltic waters and then the Mediterranean for nearly 20 years before being purchased by her current Owner in 1997. Please contact Ancasta Plymouth for further information and viewing arrangements.

    Raymarine Pathfinder Radar Scanner mounted on mast and interfaced to chartplotters
    Tricolour masthead navigation light
    Deck level navigation light set (bow + stern)
    Steaming light on mast
    Deck floodlight on mast

    COCKPIT: B&G Triton multi-function display (wind speed, boat speed & depth), NASA depth display, Raystar 125 GPS Receiver (network connection to chart plotters)

    NAVPOD AT WHEEL: Raymarine RL72C chartplotter, Navman G-Pilot 3100 display (Navman G-Pilot Display is not working although the autopilot still functions correctly)

    CHART TABLE: Shipmate VHF radio telephone, Raymarine RL72C chartplotter (networked with cockpit plotter), Trimble Transpak2, 8 channel GPS receiver (backup), Navman autopilot processor, original (redundant) B&G instruments in-situ

    Simpson Lawrence Anchorman 1000 electric windlass
    35lb CQR anchor with 35m of 8mm chain plus 35m warp
    10kg Bruce anchor
    Kedge anchor

    Mainsail cover (blue)
    Sprayhood (blue)
    Dodgers (blue with boat name in white)
    Excel 290 inflatable dinghy (NEW 2010)
    Tohatsu 3.5HP outboard motor (NEW 2010)
    Teak cockpit table
    Various warps and fenders
    Teak washboard
    Polycarbonate washboard (10mm thick)
    2 x Dorade ventilators
    2 x mushroom ventilators
    Chronometer & barometer on saloon bulkhead

    Aluminium pulpit, stainless steel pushpit, stanchions and double guardwires
    2 x horseshoe lifebuoys
    Danbuoy (telescopic)
    Distress flares (expiry Dec 2020)
    Radar reflector
    Drogue (Delta 72")
    Plastimo Cruiser ORC 6-man valise liferaft (NEW 1996, next service due 2019)
    Contessa 38
    Built by Jeremy Rogers, Lymington, 1973
    Based on a design by Sparkman & Stephens

    GRP hull, deck and superstructure
    6cm deep stringers running fore and aft over the full length of the vessel
    Steel sub-frame under the mast and above keel
    Lead keel bolted to stub with keel bolts also passing through sub-frame
    Interior trim of teak and teak faced plywood

    LOA: 11.7m
    LWL: 9.6m
    BEAM: 3.5m
    DRAFT: 2.0m
    BALLAST: 4.0t
    *All figures are approximate
    50HP diesel engine driving a 3 bladed folding propeller through a V-drive gearbox, flexible coupling and stainless steel shaft

    Nanni 4.220HE 4 cylinder 50HP diesel engine (NEW 2005)
    ZF63 IV V-drive gearbox (NEW 2007)
    Centaflex CF-M-160 flexible coupling (NEW 2007)
    3-blade Flex-O-Fold folding propeller (NEW 2007)
    Shaft - 30mm diameter stainless steel connecting shaft supported by two cutlass bearings (NEW 2007). Inner cutlass bearing is located in a through-hull housing (installed 2007). The outer cutlass bearing is located in the existing P-bracket

    Note - the engine enclosure requires the installation of new sound insulation (the previous sound insulation has been removed)

    Mechanical rod-linked geared wheel steering system
    Hydraulically actuated autopilot system (actuator connected directly to the rudder quadrant arm)

    3 x 100Ah 12V domestic batteries
    1 x 100Ah 12V engine start battery
    1 x 100A alternator charging through an Adverc Battery Management System (NEW 2009)
    Shore power comprising: Adverc galvanic isolator, RCD/MCB consumer unit, Waeco 45A battery charger, single 240V socket outlet (NEW 2011)

    Fuel - 29 gallons in single tank aft of engine, beneath cockpit sole
    Fresh water - 40 gallons in two polyethylene tanks (NEW 2002) under main cabin berths
    Masthead rig by Proctor
    Silver anodised aluminium single spreader
    Two spinnaker poles
    Jockey pole
    Selden boom (1997)
    Dedicated tri-sail track fitted to mast, 1997
    Harken MK2 headsail furling system
    Heavy duty Lewmar mainsheet 'X' track, car and traveller system with Harken blocks
    Genoa sheet turning blocks
    Spinnaker sheet turning blocks

    Main Stays - 10mm (1x19) stainless steel wire rigging. Forestay and upper shrouds renewed, 2008. Backstay and lower shrouds renewed, 2011. Selden mechanical backstay tensioner fitted 2011
    Baby Stay - 6mm (1x19) stainless steel wire rigging - adjustable on a track
    Inner Forestay - 8mm (1x19) stainless steel wire rigging. A removable staysail forestay stowed alongside the mast and secured to a strong point 1m aft of the stemhead when in use. Mechanical (screw) tensioner

    2 x genoa halyards
    2 x spinnaker halyards
    Main halyard
    Topping lift
    Spinnaker pole lifts and downhauls
    Port and starboard preventer lines

    Mainsail - 29 metre-squared by Royal Sails (NEW 1986). Re-cut by Sanders Sails in 1998 and an additional row of reefing points added (4 total)
    Genoa - 47 metre-squared furling genoa by Sanders Sails (NEW 1997)
    No.4 - 14 metre-squared hank-on sail flown from inner forestay
    Spinnaker with snuffer
    Storm Jib - 10 metre-squared by Sanders Sails (NEW 1997)
    Tri-sail - 9 metre-squared with dedicated track on mast

    2 x Lewmar 55, 3 speed primary (genoa) with Lewmar cross-link system
    2 x Lewmar 43, 2 speed spinnaker winches
    2 x Lewmar 40, 2 speed genoa halyard winches
    2 x Lewmar 25, 2 speed spinnaker halyard winches
    2 x Lewmar 16, 2 speed spinnaker uphaul and downhaul winches
    1 x Lewmar 40, 2 speed mainsail halyard winch
    *Including numerous winch handles

    Forward Cabin:
    2 berths in 'V' arrangement with infill making a double
    Lockers under for sail stowage, etc
    Lockers above to port and starboard, reading lights

    Heads Compartment:
    Lavac sea toilet
    Porcelain washbasin and separate shower head with pressurised hot and cold water supply
    Large hanging locker and separate linen/laundry lockers to starboard

    'L' shaped settee to port converting to double berth with lockers, shelves and stowage behind
    Large double leaf central saloon table
    Single berth to starboard with bookshelf and lockers behind
    Lee cloths fitted to saloon berths
    Main cabin lights and reading lights for berths

    Navigation Station:
    Full-size chart table with chart stowage and locker beneath

    Double stainless steel sinks with pressurised hot and cold water supply
    Top opening insulated coolbox with Isotherm refrigerator unit (refrigerator unit not working and requires replacement)
    Gimballed Plastimo Neptune 2000 gas cooker with double hob and separate oven and grill
    Numerous stowage lockers

    Port Quarter Berth:
    Single berth with cave lockers and cupboards above
    Reading light above
    Calorifier located below provides hot water storage and supply from engine cooling system

    Starboard Quarter berth:
    Single berth with cave lockers and cupboards above
    Reading light above
    Domestic and engine batteries located below along with battery management system
    ...Read full description
    Mooring CountryUnited Kingdom
    Year built1973
    Length11.58 m/38 ft
    Categoryfin keel
    Engine manufacturernanni 4.220he 4 cylinder 50 hp
    Material hullglass reinforced plastic

    More ads from this seller

    £ 299,000
    SubcategoryMultihull Motorb...
    Mooring CountryUnited Kingdom
    City/area -
    Year built2006
    Plymouth, South West
    £ 114,995
    SubcategoryBlue Water Cruisers
    Mooring CountryUnited Kingdom
    Year built1979
    Length13 m/43 ft
    Plymouth, South West
    £ 244,709
    SubcategorySpeed Boats
    Mooring CountryUnited Kingdom
    City/area -
    Year built2020
    Uk or Med delivery, United Kingdom
    £ 110,000
    SubcategorySailing Boats
    Mooring CountryUnited Kingdom
    Year built2002
    Length13.11 m/43 ft
    Plymouth, South West
    Ancasta Plymouth
    Profile page