Machinery
BETA 3 CYLINDER 20 HP DIESEL ENGINE
Sea water-cooled
Shaft drive to prop
ELECTRICS
2 x Powermax 85ah batteries, new May 2020
TANKAGE
Stainless steel fuel tank - 54 L
Pressurised hot water system installed in 2017
Heated by calorifier and 220v immersion tank
Bridge
CONTESSA 32 BUILT IN 1977
Classic cruiser/racer built by Jeremy Rogers in Lymington
CONSTRUCTION
GRP hull, deck and superstructure
Long keel and skeg hung rudder
Tiller steering
LOA: 9.75m (32')
LWL: 7.31m (24')
BEAM: 2.98m (9'6")
DRAFT: 1.65m (5'6")
DISPLACEMENT: 4300kg (9500lbs)
BALLAST: 2045kg (4500lbs)
All figures are approximate
Inventory
NAVIGATION EQUIPMENT
Contest 130 compass
Autohelm echosounder, speed and wind
Raymarine depth display
Raymarine wind speed/ direction display
Raymarine plotter
Garmin 128 GPS
Seavoice RT550 VHF
Radar Reflector
GROUND TACKLE
CQR anchor with chain
Kedge anchor with warp
GENERAL EQUIPMENT
Bilge pump
Warps and fenders
Boathook
Guardwires, pulpit and pushpit
Dodgers
Boarding ladder
SAFETY EQUIPMENT
Danbuoy and holder
Two horseshoe lifebuoys
Fire blanket
Liferaft (in need of service)
Rig
Mast-head sloop-rigged
Removable inner forestay
Aluminium mast and spars
Stainless steel standing rigging (Replaced 2017)
Running rigging
Slab mainsail reefing
Jockey pole
Spinnaker pole
SAILS
Ultimate Sails performance cruising mainsail, new 2020
Ultimate Sails performance cruising furling genoa, new 2020
2 x Spinnakers
No.1, No. 2 and No. 3 Jib
WINCHES
Two Lewmar 44 three speed genoa sheet winches
Four Lewmar 8 winches
Accommodation
SLEEPS 5 ACROSS FORWARD CABIN, SALOON AND STBD QUARTER BERTH
Flavel two-burner cooker
Heads with w.c. and handbasin
Beige upholstery