Beneteau Antares 6206m2005

Vessel is powered by a Nanni 5.250 TDI, 85hp 5-cylinder diesel inboard engine. Reduction gearbox with stainless steel shaft drive to a fixed 3-bladed bronze propeller.
Engine is accessed from the cockpit by a hinged GRP moulding. This makes a handy seat/bait table.
Single lever engine control at internal helm. Engine start panel with key start, rev counter, digital hour meter (Not working),  visual and audible warnings for temperature, oil pressure and charging.
Cruises all day at 10-12 knots. Depending on how dirty the bottom is she will do 15 knots
Consumption - approx 3.6 gph @ 12 knots 

Single,12v 110ah Battery providing engine start and domestic power. Battery charged via engine alternator

• Anchor with chain & warp
• Fenders
• Mooring warps
• Bow and stern cleats
• Boarding ladder
• Compass
• Raymarine DS500X colour Depth/Fish finder
• Garmin GPSmap 172 colour chart plotter
• Icom IC-M421 DSC VHF radio 
• Navigation lights
• Manual bilge pump
• Manual fire extinguishers
• Rod holders
• Emergency tiller
• Twin windscreen wipers
• Cockpit rails

The wheelhouse is entered via a sliding tinted perspex door. Helm position to starboard with padded double bench seat. Beneath here is a moulded sink, space for a single burner hob and a removable water container.
1.85m headroom and excellent visibility whether standing or seated. Wooden lacquered steering wheel, console with integral instrument panel, 12v electrical switches and fuel gauge with sender.
Glass windscreen with 2 x electric windscreen wipers. Tinted PMMA side windows with sliding inserts.

There is a cuddy cabin providing two berths each with a mattress (1.80m x 0.50m). Shelving above the berth with lockers under. Marine toilet below berth.

GRP constructed sea angling boat designed and built by Beneteau in 2005. Semi displacement hull profile with directional skeg giving excellent steerage way at both low and high speed. Flared bow minimises onboard spray.
Large self bailing deck with rear scuppers. Removable laminate seats at transom anong with fish well.

Large capacity anchor locker in bow with lid and strong point. Bow and stern rails for additional safety. Mooring cleats in bow and stern. Rod holders.

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website 

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
Sail drive and shaft seals are more than 5 years of age
Fuel and gas hoses and regulators are over 5 years old
Standing rigging and sails are more than 10 years old

NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.