Beneteau Oceanis 34.111m2022

Teak slatted aft platform
Teak slatted helm seats
1 Halyard bag (to port)
Hot/cold water cockpit shower
Galley: Compact sink cover with cutting board
Hifi Fusion + Interior loudspeakers & Waterproof exterior speakers
Dual USB socket: 1 in the saloon, 2 in the forward cabin,
1 in the aft cabins
Full 230 V system (6 Inside sockets, 1 Shore power socket)
40 Amperes battery charger
2 AGM service batteries - 100 Ah (in lieu of standard - 75 Ah)
Mosquito nets for opening portholes
Saloon: LED indirect lighting
Galley: Stainless steel 2 burner oven/grill cooker on gimbal
(in lieu of standard)

To starboard: 1 Triton² Graphic display
Sensor (Log, Speedometer, Temperature)
Wind Sensor (Windvane, Anenometer)
Windex Windvane

Starboard helmstation: 1 Multifunction touchscreen Zeus 7" wide
wireless(GPS, Chart plotter, Card reader - Navionics Silver
cartography included) - The Triton display moves to the port side
NAC3 autopilot + control (to port)
V60 VHF radio fixed to the chart table + AIS receiver function

1 Starboard manual (H35.2 STA) rigging winch + Cadet Grey halyard bag
2 Manual (H40.2 STA) genoa sheet winches
Polyester bowsprit with integrated anchoring gear and bobstay
(for Code 0and asymmetric spinnaker)
Asymmetrical spinnaker rigging / Code 0 (sheets, Blocks, Halyards)
Genoa on furler, high resistance Dacron (to replace the
standard selftacking jib)
Additional jammers (on the roof for the halyard or on the coaming
for the Genoa sheet, depending on the pack)
Rigging run back to cockpit (except boom topping lift)
Genoa sheet 3D adjustment rings on the roof (replacing the
self-tacking jib track and the traveller)

1000W electric windlass + remote control

Mooring and anchoring kit

Luxe Sprayhood

Cover for luxe cockpit table

Luxe cocpit table

Access openings to port and starboard

Diesel heating

Wood companionway steps

Pearl grey hull

Opening porthole in the cockpit for the aft cabins

Teak cockpit floor

Antifouled, launched and commissioned